BOX1

P1000 Project "Snowball"

S

Superthrill

Well-Known Member
Supporting Member
Oct 4, 2018
667
1,557
93
North Carolina
Ownership

  1. 1000-5
That plate is 3 inches wide and welded inside and underneath backside of that square tube the full 3 inches. Then welded to the diagonal. It aint going anywhere.
 
  • Like
Reactions: JenElio and TripleB
S

Superthrill

Well-Known Member
Supporting Member
Oct 4, 2018
667
1,557
93
North Carolina
Ownership

  1. 1000-5
There is another option that i have drawn out that can be bolted in. Got somebody that may make them, but it requires more tubing etc. It attaches to the rear shock tower upright tube AND the front tube behind the radiator. Runs behind the shock. Had to get real creative with that design but it was one of those AHAH! Moments when i figured it out.
 
JenElio

JenElio

NTC's NoMo Chupacabra Caliente!!....
Lifetime Member
Oct 31, 2019
62,472
589,079
113
Loxahatchee, florida
Ownership

  1. Other Brand

  2. 1000-5
There is another option that i have drawn out that can be bolted in. Got somebody that may make them, but it requires more tubing etc. It attaches to the rear shock tower upright tube AND the front tube behind the radiator. Runs behind the shock. Had to get real creative with that design but it was one of those AHAH! Moments when i figured it out.
So if you do end up making these let me just say I'll buy one. My wife has been asking me to come up with somtn like this but I just haven't got around to it. Nice work!
 
S

Superthrill

Well-Known Member
Supporting Member
Oct 4, 2018
667
1,557
93
North Carolina
Ownership

  1. 1000-5
Got my last fairlead for the top winch installed last night. Wished i had made it tuck in a little higher, but did not want to cut the top. I did want it out far enough to go down to the rear hitch with a snatch block if i need a low pull.
20200504 154537
 
S

Superthrill

Well-Known Member
Supporting Member
Oct 4, 2018
667
1,557
93
North Carolina
Ownership

  1. 1000-5
Now basically anything i can get up with a winch, i can now get down on my own.

I swore this was going to be the last thing i added to the P1K...
But racing type bucket seats ,retractable harness, a HMF muffler and a full custom cage.


Then I will be done...

Ahaha! One other thing. A burrito cooker for the engine compartment!
 
S

Superthrill

Well-Known Member
Supporting Member
Oct 4, 2018
667
1,557
93
North Carolina
Ownership

  1. 1000-5
Going in today coming out Monday. Doing sandcave, chalk cave and primroy arch.
 
  • Like
Reactions: TripleB
S

Superthrill

Well-Known Member
Supporting Member
Oct 4, 2018
667
1,557
93
North Carolina
Ownership

  1. 1000-5
Weekend riding solo in Tackett. Chalk Cave, Primroy Cave, Primroy Arch, Ridge Trail and Overlook.
20200509 154705

Chalk Cave. Huge! Pretty wet as well.

20200510 130647

Primroy Arch.
20200510 141556
 
  • Like
Reactions: Mudwing and TripleB
S

Superthrill

Well-Known Member
Supporting Member
Oct 4, 2018
667
1,557
93
North Carolina
Ownership

  1. 1000-5
20200510 163946

Tie rod on the Primroy Creek Trail

Had to come home yesterday. The Pioneer started shutting off. Would crank right back up. Noticed on the road ride back to the truck, it did not feel like it was running right.

Got to check the ground and the injector harness...
 
  • Like
Reactions: TripleB
S

Superthrill

Well-Known Member
Supporting Member
Oct 4, 2018
667
1,557
93
North Carolina
Ownership

  1. 1000-5
20200514 193309


Pulled the pins out, soldered wire back in, reninstalled pins. Added the liquid tape for some added vibration protection.
Just got to reassemble everything and ready to go!
 
IA-AJB

IA-AJB

New Member
Dec 5, 2020
12
23
3
Iowa
Ownership

  1. 1000-3
P1000-5. Was supposed to be just a run around toy , but.....
Will add to this first post each time I make a mod.

Mods so far:
Viper Max 4500 winch
Moose snow plow
Tru Isolator
35 amp hour second battery
RAM mount for 8" tablet
Rock lights
Glove box light
9 " LED light on A pillar
4" flood LED on B pillar
Rerouted vent lines
PBR shock spacer lift

View attachment 103114
Did you notice much difference in the ride after adding the shock spacers?
 
  • Like
Reactions: JenElio
JenElio

JenElio

NTC's NoMo Chupacabra Caliente!!....
Lifetime Member
Oct 31, 2019
62,472
589,079
113
Loxahatchee, florida
Ownership

  1. Other Brand

  2. 1000-5
Did you notice much difference in the ride after adding the shock spacers?
He hasn't been on the site in a while bud. I've been running shock spacers for a while now and it's not a drastic change on ride comfort. Stock shocks kinda suck to begin with sooooo....... What ever little comfort is lost by adding that bit of preload to the shock is a good trade for the 1.5"+ ride height you gain. One of the cheapest mods you can try, that and eliminating the rear sway bar 👍

Good luck
 
  • Like
Reactions: Mudwing and IA-AJB
EMAW

EMAW

Mama Tried!
Lifetime Member
Supporting Member
Jun 3, 2020
2,955
37,089
113
Kansas
Ownership

  1. 1000-3
My OEM rear springs were sagging bad after our trip to NM. I installed new springs from S3 Power Sports. I gained 1.5” ground clearance with no spacers. Going to replace the front springs also in the near future.
 

Similar threads

BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!