P1000 Project "Snowball"

[Superthrill]

P1000-5. Was supposed to be just a run around toy , but.....
Will add to this first post each time I make a mod.

Mods so far:
Viper Max 4500 winch
Moose snow plow
Tru Isolator
35 amp hour second battery
RAM mount for 8" tablet
Rock lights
Glove box light
9 " LED light on A pillar
4" flood LED on B pillar
Rerouted vent lines
PBR shock spacer lift

 

[Admin]

 

[Superthrill]

35 AH battery on its side. Buss bars mounted with Velcro

 

[Superthrill]

Auxbeam Led Spots and self made brackets

 

[Superthrill]

LED pod lights and B pillar floods.

 

[BWAF]

LED pod lights and B pillar floods.View attachment 103124 View attachment 103125 View attachment 103126

All looks good !

Sent from my SM-G930U using Tapatalk

 

[Superthrill]

 

[Superthrill]

Led stick on pods for glove box and some light

 

[Superthrill]

Shock spacers done on the ss

 

[Superthrill]

Velcro winch controls to console. No need for a rocker switch!

 

[Eltobgi]

Looking good! Some good ideas! I mounted Auxbeam on the pillars as well...

I also have a 22” spot/flood on the front bumper and couldn’t believe how bright running the three together was while pushing snow a few weeks ago!

 

[Superthrill]

DIY skid plates. Got one side done this evening. Got a 16x48 piece of UHMW from Ebay for $109 delivered.
Used a forstner 1 1/2" bit to countersink the holes followed by a step bit.

 

[Superthrill]

 

[Superthrill]

 

[Superthrill]

Used a router and a 3/8 round over bit on bottom sides, and a 1/8 round over on top.

 

[Superthrill]

The 16" wide piece was perfect width. Butts up against the frame and sticks out about an inch. Hoping it will act like a tree kicker to a degree.

 

[Superthrill]

So, trying to get this thing ready for the Takeover and my shop is still full. So I picked up a Lincoln 140 Pro Mig. Got my crossmember added. Next is my Ruffstuff braces to the factory crossmember. Will clean it all up and paint it when those are in.

 

[Hondoman]

Led stick on pods for glove box and some light

View attachment 103130 View attachment 103131

Have a link for these?

I'd like something like that in the glove box.

 

[Superthrill]

Sorry I do not. They were on an end display at Lowes. A card of 6 I believe for 9 bucks.

 

[ToddACimer]

So, trying to get this thing ready for the Takeover and my shop is still full. So I picked up a Lincoln 140 Pro Mig. Got my crossmember added. Next is my Ruffstuff braces to the factory crossmember. Will clean it all up and paint it when those are in.

View attachment 115886

Ruffstuff tube gussets are the way to go

 

[Hondoman]

Sorry I do not. They were on an end display at Lowes. A card of 6 I believe for 9 bucks.

Thanks, I have a lowes close to me.