Heres a sneak peek of mine
Will be installing it at Takeover
View attachment 124588
Added some aux tail/ stop lights. My factory ar covered by my rear spare carrier.
Nice - what PVC did you use? Had used sch 40 but would like to do something lighter. Also pool noodles work good to protect the spines Extra axle storage optionsAdded a way to carry a spare axle and keep
It from bouncing around in the bed getting covered in mud and dirt. It’s 2 bolts into factory locations and zip ties. It will fit with my Ridgid boxes mounted.
Hold a front axle perfectly, 4” cap, 24” precut section of 4” pipe, and a cleanout on the other end. Bent a couple of pieces of flatbar and used a strap loop to keep it from moving forward and back. The axle JUST fits inside so it won’t shift either and I wrapped the axle boots on paper towels, to keep them from rubbing.
View attachment 124578
Nice - what PVC did you use? Had used sch 40 but would like to do something lighter. Also pool noodles work good to protect the spines Extra axle storage options
I need to build a couple more
That’s Lowe’s for ya lol - they only had the 3” or 4” I forget now in sch40 which is heavier than I really want. Like the black paint.I missed that great minds think alike.
The precut pieces in HomeDepot not pressure rated.
Um did you pull a permit and are you licensed to cut and glue that pipe? I'm going to need to see an air test. 5lbs for 15 min.
Going to try these with the backup litesI just did a pair of flush mount rough country flood lights for backup.
is a steel built bumper that can hold up to a 5k winch on a 5 seater it bolts behind the rear cage tubes and and has 2 arms that go to the sides of the frame rails you would have to drill 2 holes in your frame it comes with 2 3/4 in clevis mounts and 2 5 in flush mount pod lights pm me for pricing you can text me with any questions also 321-231-2662Where can I find more pics or info on the rear winch mount bumper? Does he have any pics or info on buying them?
yes sir factory exaust fits you can get the freespool part of the winch from under heath the bed dumps but barely touches at full dump but the tailgate wont lay flat when dumpedDo you keep the factory muffler?
Dam scabs!Nope... I have a buddy he did it a lot cheaper.
@knuckledeep does great work! I have tree kickers from him and have the winch mount ordered.Do you keep the factory muffler?
Now you need the a arm guards he builds. Dam near bullet proof!@knuckledeep does great work! I have tree kickers from him and have the winch mount ordered.
I missed that great minds think alike.
The precut pieces in HomeDepot not pressure rated.
First round of adds:
Hard roof
Glass windshield
Wiper/Washer
Soft front doors
Soft mid-panel
Winch
D-Rings
Front Bumper
Limb risers
Payne Strips
UHMW Skid
SuperATV Arched A-Arms
Switch panel with USB
Relay/Fuse-block
Dual Battery
42" Light bar
Hood cube lights
Backup cube lights
LED dome lights
Backup Camera
Horn
ROPS Bag
GPS with trail maps and XM
HAM radio
Fire Extinguisher
Highlift Jack
Amazon used USPS, were rural our driveway is ¾ mile round trip, so they won't drop packages at our house. It's an hour round trip to local PO plus waiting in line. Won't pickup any of the deliveries till tomo afternoon. Anyone know how to overcome this? We've been fighting it since we moved in in July. Sent email to Amazon they responded with they would move USPS to 3rd in shipping priority for us. We've provided the rural package delivery form too.
Where did you find a washer? Any pics?
That would be schedule 40 cellular or foam core drain pipe. Used for drain applications only. They should also have standard pressure rated PVC pipe as well.