That rear bumper looks Bad A$$
Can't wait to see my rear bumper!
It does, it’s solid piece, @knuckledeep put a lot of effort into making it work and fit somewhere it shouldn’t.
Damnit now it's worse having to wait till next week!
NOOOOOOO!I meant to say...you won’t need it and it won’t benefit you at Takeover it’s a useless bauble....
Does that help???
NOOOOOOO!
It looks sweet!
Any thought to brushing on some POR15?Well I tried!!! You can buy me a beer for my awesome HondaSXS insulated cup and I’ll let you be jealous.
I am going to have to repaint it I rushed him to send it and it hadn’t fully cured yet. So all the more than adequate shipping protection he put on it rubbed some of the paint off and left imprints in other places, but that is in NO WAY his fault it’s all mine I waited till next to the last min to order one and decided to be out of town enough between now and Tuesday that I wouldn’t have any time to install it and I didn’t want to wait until Thursday to have a rear winch since we are going to be riding Tuesday.
I’ll sand it down, mask, and repaint it installed later, my ROPS was tweaked just enough it was a PITA to get one side of the upper holes to line up. I have a new to me HVLP gun I can try out with some thick farm implement paint. @CumminsPusher any advice is welcome.
Already have the paint I just used for something less not rusty just not as pretty as it could have been if I’d been patient...Any thought to brushing on some POR15?
You got it
Powder coat???
I have same gun. I also have the wife's old electric stove/oven. if the parts not too big i may be able to do it my self..The bumper??? If I had a big enough oven I’d blast it clean and do that...all I have is a craigslist wall oven it works ok for small stuff.
I have plans for a larger convection one once I have room in a shop. I’ll buy a better gun too right now I have a HF special it’s ok for single coat small pieces but it’s not powerful enough for multi coat pieces.
I have same gun. I also have the wife's old electric stove/oven. if the parts not too big i may be able to do it my self..
I have been doing the same. Just dont know if i have time to do anymore side stuff.
I appreciate it buddy I made it to accomplish a alot and be overkill strong enoughIt does, it’s solid piece, @knuckledeep put a lot of effort into making it work and fit somewhere it shouldn’t.
I hadnt got around to it...but.i was gonna ask. Thanks for posting this up.Couple of members asked how I did my dual winch wiring and I made up a PDF using switches from OTRATTW - The standard in high quality custom rocker switches.
View attachment 132822
Wiring diagram is universal.
Saved for future reference.Couple of members asked how I did my dual winch wiring and I made up a PDF using switches from OTRATTW - The standard in high quality custom rocker switches.
View attachment 132822
Wiring diagram is universal.
I like the on/off/key switch. That solves another dilemma that has come up.Couple of members asked how I did my dual winch wiring and I made up a PDF using switches from OTRATTW - The standard in high quality custom rocker switches.
View attachment 132822
Wiring diagram is universal.