Talon 1.5" seat risers

[Boundertom]

Don't worry about sending a replacement, Brian. I just don't think it is going to be a problem. I appreciate the offer!

 

[Admin]

 

[highpocket74]

Ok. But if it does become a problem let me know and I’ll dispatch a replacement.

 

[boomer_rich]

I got my risers installed also. I haven't been for a real ride yet, because it is freaking hot! I think I am going to like them a lot. Wife and I are both short folks, and the view over the front is much better. As a side benefit, the joint in the SATV windshield is less in my direct line of sight.

Quality of the pieces is excellent, and installation is pretty straightforward. I did have one small issue with one of the covers for the passenger side. The little right angle part of the the tab that goes into the hole snapped off. If you are installing these, this will make some sense. I was being carefull, but it broke. It still seems secure and I don't think it is going to be a problem, so I didn't even mention it to Brian. Until now I guess.

Anyway, I definitely recommend these risers. Sure, I could have fabbed something up, but even a retired guys time is worth something!

I did the same exact thing with one of my plastic guards. I thought the same thing as it seemed to be secured enough to not be an issue. I just got back from a week long, 400 mile Hatfield-McCoy trip and it seems to have held up fine.


Sent from my iPhone using Tapatalk

 

[highpocket74]

Keep me posted

 

[Boundertom]

Keep me posted

👍 Will do.

 

[highpocket74]

Picking up another 120 batch of seat risers today. Sold all but 8 individual risers from the first batch of 100!!

Thanks to all of my customers. If you have comments are suggestions, message them to me. I'll always value real feedback.

 

[Beez]

Love my driver side seat risers. I never should have told my wife. Now she want's some for the passenger seat. She also likes driving more now.

 

[highpocket74]

This was a game changer for my wife. From the first time she sat in the Talon she did not like the view over the hood. Now she can actually see what she needs to see and likes driving more.

Love my driver side seat risers. I never should have told my wife. Now she want's some for the passenger seat. She also likes driving more now.

 

[highpocket74]

Honda Talon Seat Riser Cubes - Complete Kit | 10-80 Dirt Sports

Complete bundle of seat riser cubes for both Talon front seats. Downloadable instructions here.

www.10-80dirtsports.com

Honda Talon Driver Seat Riser Cubes | 10-80 Dirt Sports

Driver Seat Risers have been redesigned into Seat Riser Rails to allow moving seat rearward as well as upward. The new listing will be available soon for pre-orders. Untill then, this cube style will be made available to purchase. Fits '19- and up Talon, all models Driver seat kit includes:(4)...

www.10-80dirtsports.com

Honda Talon Passenger Seat Riser Cubes | 10-80 Dirt Sports

The only Talon passenger seat specifc riser availableFits '19- and up Talon, all models Passenger seat kit includes:(4) 1.5" steel seat risers(2) new, longer Class 10 flange bolts for seat front mounting(2) new Class 10 flange nuts for seat rear mounting(2) 3d printed ASA plastic seat anchor...

www.10-80dirtsports.com

 

[highpocket74]

Got my first seat riser return coming from a customer that says:

• the bolts aren't long enough (which is bull)
• and the brackets aren't welded and could collapse.

Unless someone's ass weighs more than the 1.8 tons (3600 pounds) of bending force it takes to make these, I don't think this is even remotely a problem. The brackets are designed to be held in compression once the bolts are tightened, meaning they press onto themselves for strength.

This same person asked for an intake kit discount for an X4 build project in exchange for an install video, which I accepted and he did make a good video. Later he purchased the seat riser kit and asked for a discount after the purchase through ebay. I told him there was nothing I could do after the purchase through ebay. So now I think he just wants to return the seat riser kit because he didn't get a discount, not because it doesn't fit. Of the roughly 150 other buyers to date, no one has mentioned anything about the bolts being short.

My seat risers should be much stronger than the extruded jeep seat risers sold on ebay because my load bearing surface is MUCH larger than those extruded cross section pieces. I also don't know of anyone else making a riser solution that works on the passenger seat.

I was initially skeptical about the video since the guys youtube channel has nothing but diesel and harley stuff. But I gave the benefit of the the doubt. The video is decent, but I'm not giving away parts all day for someone's build project even in exchange for an install video.

I had a similar situation with an etsy customer who ordered a Pioneer 1000 shifter plate then returned because it didn't fit. Come to find out, after I got pictures from them, they apparently didn't realize it goes UNDER the dash, not on top. But how can you even trust pictures? Then a few months later, the same person ordered a Talon shifter plate then says it doesn't fit, which is TOTAL BULL, because they do fit. After several returns on etsy like this, I removed my listings. I've had very few problems with ebay buyers but if this escalates, I'll cease on that outlet also. I've had zero problems with customers shopping directly through my website store. Everyone is just trilled to get a response when they ask a question by email, text or call!!

 

[Vondy]

Got my first seat riser return coming from a customer that says:

• the bolts aren't long enough (which is bull)
• and the brackets aren't welded and could collapse.

Unless someone's ass weighs more than the 1.8 tons (3600 pounds) of bending force it takes to make these, I don't think this is even remotely a problem. The brackets are designed to be held in compression once the bolts are tightened, meaning they press onto themselves for strength.

This same person asked for an intake kit discount for an X4 build project in exchange for an install video, which I accepted and he did make a good video. Later he purchased the seat riser kit and asked for a discount after the purchase through ebay. I told him there was nothing I could do after the purchase through ebay. So now I think he just wants to return the seat riser kit because he didn't get a discount, not because it doesn't fit. Of the roughly 150 other buyers to date, no one has mentioned anything about the bolts being short.

My seat risers should be much stronger than the extruded jeep seat risers sold on ebay because my load bearing surface is MUCH larger than those extruded cross section pieces. I also don't know of anyone else making a riser solution that works on the passenger seat.

I was initially skeptical about the video since the guys youtube channel has nothing but diesel and harley stuff. But I gave the benefit of the the doubt. The video is decent, but I'm not giving away parts all day for someone's build project even in exchange for an install video.

I had a similar situation with an etsy customer who ordered a Pioneer 1000 shifter plate then returned because it didn't fit. Come to find out, after I got pictures from them, they apparently didn't realize it goes UNDER the dash, not on top. But how can you even trust pictures? Then a few months later, the same person ordered a Talon shifter plate then says it doesn't fit, which is TOTAL BULL, because they do fit. After several returns on etsy like this, I removed my listings. I've had very few problems with ebay buyers but if this escalates, I'll cease on that outlet also. I've had zero problems with customers shopping directly through my website store. Everyone is just trilled to get a response when they ask a question by email, text or call!!

You'll always have some idiots to deal with in business, just the way it is. Best thing is just refund them once item is returned, otherwise they will make it their life's mission to ruin your reputation.

By the way, love my seat risers. Puts my legs at a much more comfortable angle and gives a little better view of trail. I have the amazon ones on my driver and yours on passenger. Either I didn't know about yours for the driver or you weren't making them yet.

 

[Hondasxs]

We need to start a customer story time thread.. lol.
I have a few wild ones as well.

 

[highpocket74]

We need to start a customer story time thread.. lol.
I have a few wild ones as well.

This would be interesting!

 

[highpocket74]

You'll always have some idiots to deal with in business, just the way it is. Best thing is just refund them once item is returned, otherwise they will make it their life's mission to ruin your reputation.

By the way, love my seat risers. Puts my legs at a much more comfortable angle and gives a little better view of trail. I have the amazon ones on my driver and yours on passenger. Either I didn't know about yours for the driver or you weren't making them yet.

You probably got the driver side first. My same risers work for both seats, only the bolting is different on the funky passenger seat.

 

[CumminsPusher]

Got my first seat riser return coming from a customer that says:

• the bolts aren't long enough (which is bull)
• and the brackets aren't welded and could collapse.

Unless someone's ass weighs more than the 1.8 tons (3600 pounds) of bending force it takes to make these, I don't think this is even remotely a problem. The brackets are designed to be held in compression once the bolts are tightened, meaning they press onto themselves for strength.

This same person asked for an intake kit discount for an X4 build project in exchange for an install video, which I accepted and he did make a good video. Later he purchased the seat riser kit and asked for a discount after the purchase through ebay. I told him there was nothing I could do after the purchase through ebay. So now I think he just wants to return the seat riser kit because he didn't get a discount, not because it doesn't fit. Of the roughly 150 other buyers to date, no one has mentioned anything about the bolts being short.

My seat risers should be much stronger than the extruded jeep seat risers sold on ebay because my load bearing surface is MUCH larger than those extruded cross section pieces. I also don't know of anyone else making a riser solution that works on the passenger seat.

I was initially skeptical about the video since the guys youtube channel has nothing but diesel and harley stuff. But I gave the benefit of the the doubt. The video is decent, but I'm not giving away parts all day for someone's build project even in exchange for an install video.

I had a similar situation with an etsy customer who ordered a Pioneer 1000 shifter plate then returned because it didn't fit. Come to find out, after I got pictures from them, they apparently didn't realize it goes UNDER the dash, not on top. But how can you even trust pictures? Then a few months later, the same person ordered a Talon shifter plate then says it doesn't fit, which is TOTAL BULL, because they do fit. After several returns on etsy like this, I removed my listings. I've had very few problems with ebay buyers but if this escalates, I'll cease on that outlet also. I've had zero problems with customers shopping directly through my website store. Everyone is just trilled to get a response when they ask a question by email, text or call!!

No issues with mine, might be only thing that’s not messed up lol. Glad I got those from you it’s a big difference! I still need to get a couple of your covers from ya.

 

[Tramguage1]

Shows out of stock on the complete set. Any idea when they will be in stock? Need a set with covers.

 

[highpocket74]

That's because I only have one set of 4 for one seat. More sets are being cut and bent soon at the shop and we are printing more covers. I should have more of everything after thanksgiving.

I can tell people were posting about seat risers on Facebook I guess, because last week I got hammered with orders!

 

[Tramguage1]

That's because I only have one set of 4 for one seat. More sets are being cut and bent soon at the shop and we are printing more covers. I should have more of everything after thanksgiving.

I can tell people were posting about seat risers on Facebook I guess, because last week I got hammered with orders!

Well that's good news!!!!
When Ya get an extra set available just send me a text and I'll get Ya payed. I can wait if you have a big run on the next batch.

 

[highpocket74]

Seat risers are currently out of stock but will be picking up a stocking order tomorrow 11-29-22 with shipping to follow. We have a few sets of passenger seat bolt covers 3d printed and ready to go also.

 

[CumminsPusher]

Well that's good news!!!!
When Ya get an extra set available just send me a text and I'll get Ya payed. I can wait if you have a big run on the next batch.

Ya you need to get a set especially as tall as you are!