P1000m5 The Rebuild And Life Of "clutch".

CumminsPusher submitted a new Garage Item:

The Build And Life Of "clutch".

Build number 4 on a Pioneer starts now. Been a long road but no one can say I don't bleed red.
First pic
View attachment 60055

Read more about this showcase item here...

 

[BWAF]

Whats the fuse size

Sent from my SM-G930U using Tapatalk

 

[CumminsPusher]

I was wondering where that music was coming from!!!!

Loud for sure!!!!!

It wasn’t so much loud we were going for as much as clarity and adjustability. Separate amps, lows mids and tweets always do a great job of that. Also it was important to use an amp that is super efficient because there is only so much power available.
But yes...ITS DAMN LOUD! Lol

 

[CumminsPusher]

What the fuse size

Sent from my SM-G930U using Tapatalk

each has a 30amp

 

[BWAF]

each has a 30amp

That's what mine is. I just put amp on sub. kicker head unit is 30 rms 4 channel for 4"two ways

Sent from my SM-G930U using Tapatalk

 

[CumminsPusher]

That's what mine is. I just put amp on sub. kicker head unit is 30 rms 4 channel for 4"two ways

Sent from my SM-G930U using Tapatalk

Our head unit is the Infinity 450 marine and it does have power output but just didn’t have enough for the 6.5’s and there was enough room for a separate amp so I decided to go this route
Deck is currently just sitting there.

 

[BWAF]

Our head unit is the Infinity 450 marine and it does have power output but just didn’t have enough for the 6.5’s and there was enough room for a separate amp so I decided to go this route
Deck is currently just sitting there.
View attachment 72402

I wish I would have gone with the 6.5 or some 6x9s don't have much mid

Sent from my SM-G930U using Tapatalk

 

[CumminsPusher]

I wish I would have gone with the 6.5 or some 6x9s don't have much mid

Sent from my SM-G930U using Tapatalk

6.5 is pretty good all around and these handle a pretty good amount of bass. Would’ve liked to go 6x9 but didn’t have enough depth, always liked 6x9

 

[BWAF]

6.5 is pretty good all around and these handle a pretty good amount of bass. Would’ve liked to go 6x9 but didn’t have enough depth, always liked 6x9

That why I did couldn't find shallow mounts

Sent from my SM-G930U using Tapatalk

 

[elkguide]

Our head unit is the Infinity 450 marine and it does have power output but just didn’t have enough for the 6.5’s and there was enough room for a separate amp so I decided to go this route
Deck is currently just sitting there.
View attachment 72402

One question after looking at this picture, @CumminsPusher.......

can you drive a rig that isn't in 4WD????

 

[CumminsPusher]

One question after looking at this picture, @CumminsPusher.......

can you drive a rig that isn't in 4WD????

I suppose so lol. It came off of the trailer into the shop during a downpour and ramps were slick.
Not in 2wd much though, try to stay away from that type of riding!

 

[elkguide]

I suppose so lol. It came off of the trailer into the shop during a downpour and ramps were slick.
Not in 2wd much though, try to stay away from that type of riding!

I kinda figured that you would have filled up the 2WD and Turf slots with some sort of other "USEFUL" stuff!

 

[CumminsPusher]

I kinda figured that you would have filled up the 2WD and Turf slots with some sort of other "USEFUL" stuff!

Our groups little “Turf challenge “ took out a control arm by pretty much a stick at the Takeover. Damn @Plumber32 is a bad influence! Won’t be doing that crap no more. 4wd does just fine.

 

[CumminsPusher]

Man I love Harbor Freight. Not a bad load for 100$! Adding a few things to better help getting unstuck btw these waterproof Harbor boxes seem to be close to the Pelican Cases.

 

[elkguide]

Man I love Harbor Freight. Not a bad load for 100$! Adding a few things to better help getting unstuck btw these waterproof Harbor boxes seem to be close to the Pelican Cases.
View attachment 72458

That's so very kind of you @CumminsPusher to get all of those things to help pull others out
because I am sure that you NEVER get stuck!

 

[Remington]

Man I love Harbor Freight. Not a bad load for 100$! Adding a few things to better help getting unstuck btw these waterproof Harbor boxes seem to be close to the Pelican Cases.
View attachment 72458

me too! i love that place. if you know what your looking for you'll find some good stuff.
hay, thanks for the text today. good to hear from you my friend

 

[CumminsPusher]

me too! i love that place. if you know what your looking for you'll find some good stuff.
hay, thanks for the text today. good to hear from you my friend

Go enjoy all that hard work you’ve put in!

 

[CumminsPusher]

It was Clutch’s maiden voyage this last weekend out of the snow riding with Tiger and she did good. Family back at it. Hard work paid off very happy with the machine

Can’t forget these are a great utility machine!

Ang and friends had a ball

 

[CumminsPusher]

Even the double backed angle iron held up great. Lots of big rocks and downed trees. All scraped up and some damage around but lower bars perfect. I still may do something here but worked in a 20 minute pinch for a couple bucks.

 

[WillyBill]

View attachment 73364
Even the double backed angle iron held up great. Lots of big rocks and downed trees. All scraped up and some damage around but lower bars perfect. I still may do something here but worked in a 20 minute pinch for a couple bucks.

Can we see pics of the angle from underneath?

Thanks,

WB

 

[Tigermark]

View attachment 73364

Even the double backed angle iron held up great. Lots of big rocks and downed trees. All scraped up and some damage around but lower bars perfect. I still may do something here but worked in a 20 minute pinch for a couple bucks.

Where’s my set?