CumminsPusher
Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
It’s 5 1/2 inches less then stock if I remember. Measures 15 inches.What is the glass opening size of the Honda windshield?
It’s 5 1/2 inches less then stock if I remember. Measures 15 inches.What is the glass opening size of the Honda windshield?
Looks good like the drain plug .Sub is in!
I ported this into the cab and seals up with a simple shower drain wash out plug. Exact same setup here as PJ had. No reason to change anything. View attachment 72233View attachment 72235 View attachment 72234View attachment 72236
It’s not for drain just specifically for porting into the cab while dry out. I didn’t have it in at all for the Takeover last year though, my bad! Doesn’t matter though the sub takes it.I'll bet that by the time you pull the drain plug, the sub is really gurgling!!!!!
So the hole with plug is just for ventilation if you go through water?It’s not for drain just specifically for porting into the cab while dry out. I didn’t have it in at all for the Takeover last year though, my bad! Doesn’t matter though the sub takes it.
View attachment 72246
Ya so we can lock up the port. Ported boxes sound betterSo the hole with plug is just for ventilation if you go through water?
More for lessYa so we can lock up the port. Ported boxes sound better
It’s a 1200 amp super capacitor that helps regulate voltage. If bass hits it gives the extra juice so the battery doesn’t fall on its face. Keeps the entire system at a steady voltage. Also as a slight reserve.What's that for
Sent from my SM-G930U using Tapatalk
Can you post a link to this capacitor I think I need an upgrade from this 1/2 farad cap...Capacitor is in!View attachment 72259
Sweet setup big amps bet is sounds goodGot the twin Rockford Fosgate 300 Punch compacts ready. Same setup as prior. One is two channel 2ohm bridged for the Wet Sounds sub and one is a four channel 4ohm for the 4 Infinity 6-1/2 mids along with additional tweets. This gives true stereo sound through separates above each main seat in the Pioneer and can be adjusted easily if sound is too loud for anyone.
Both amps are true rms ratings, not rated at max, with very low distortion and super efficient. They are designed for this type application. They can handle moisture and high heat but for this application I added efficient cooling fan that cools when bass amp is turned on and also a second that comes on when in box temp reaches 115f. This box that I made fits between the rails above the gas tank and uses pop clips to hold in place and seals itself to the underside of the seat with a rubber gasket.
The whole system was designed to be hidden and take up as much unused space as possible yet be able to give easy access to the equipment and for maintenance.
Getting closer to a full system, starting backwards and working forward, slowly but surely.
View attachment 72391
Actually these are really small considering the output powerSweet setup big amps bet is sounds good
Sent from my SM-G930U using Tapatalk
Yeah they're not that big it's probably about the size of my Kenwood 200 watt RMS monoActually these are really small considering the output power
View attachment 72401