P1000m5 The Rebuild And Life Of "clutch".

[BWAF]

Did yours come with the metal plate to reinforce the front middle lap? The new/replacements ones do.

Nope

Sent from my SM-G930U using Tapatalk

 

[Admin]

 

[CumminsPusher]

Now how in hades can you lose a 1/3 of your skid system and not know it? Was there beer involved? HA! I know, that was a stupid question!

Oh man that creek ride was rough. I think there were many parts from others floating downstream. Hondasxs even broke in there, many turned around.

 

[Smitty335]

Oh man that creek ride was rough. I think there were many parts from others floating downstream. Hondasxs even broke in there, many turned around.

Sounds like my kind of float! HA!

 

[CumminsPusher]

What tires is he getting?

Depends if I get another set of wheels so I could run two sets, one for winter and another for summer. There isn’t a perfect set for both so I’m waiting

 

[Smitty335]

Depends if I get another set of wheels so I could run two sets, one for winter and another for summer. There isn’t a perfect set for both so I’m waiting

I've only run the stockers, Moto Hammers and the ITP Black Waters, I like the BW the best so far. I've been out on them five times a haven't busted a tire, There good in the mud, logs and small rocks, HA! If you have to run much pavement , think they would wear quickly.

 

[Eltobgi]

Oh man that creek ride was rough. I think there were many parts from others floating downstream. Hondasxs even broke in there, many turned around.

Mud Man had to help me once, lol. But in my defense I was running in two wheel drive until I got stuck and with a broken drive axle the best I could do was 3WD...

 

[CumminsPusher]

I've only run the stockers, Moto Hammers and the ITP Black Waters, I like the BW the best so far. I've been out on them five times a haven't busted a tire, There good in the mud, logs and small rocks, HA! If you have to run much pavement , think they would wear quickly.

I really do like the Ripsaws they are really tough, even with all the bushwhacking we do they hold up but they’re terrible in the snow.

 

[Smitty335]

I really do like the Ripsaws they are really tough, even with all the bushwhacking we do they hold up but they’re terrible in the snow.

They have stiff side walls? I'm running 8 front & 7 back.

 

[Eltobgi]

Alright finally finished with the bumper! Decided I wanted lower half white so just the bars were red.
View attachment 71363
Long way from what she looked like now!
View attachment 71368
View attachment 71369
All Warn up front,shackles,fairlead, hook and Provantage 4500 wide spool, however waiting for the new synthetic rope. The business end of the Pioneer finished.
View attachment 71364
Shackle mounts are solid steel welded to and through the face of the bumper to the actual frame mounting points. No worries of pulling these out. Chose oversized hole in the mount and placed rubber tube inside so the shackles don’t rattle or move unless you want them too.
View attachment 71362

Looks better than ever! Nice work!

 

[Plumber32]

Looks better than ever! Nice work!

That's what I told him every generation is better than the last. Can't wait to see the next one!

 

[CumminsPusher]

Looks better than ever! Nice work!

Thank you. It’s nice to be back at it. Couldn’t get enthused to save my life. Got only a couple days at it so far, need to try to find time quickly

 

[CumminsPusher]

That's what I told him every generation is better than the last. Can't wait to see the next one!

Next one??? What the hell, thought we were friends?! 4 in 3 years is enough!

 

[Plumber32]

Next one??? What the hell, thought we were friends?! 4 in 3 Years is enough!

Lol! 700 don't count

 

[CumminsPusher]

Rear winch installed.

And to a finish of the day!

 

[chadbo]

Alright finally finished with the bumper! Decided I wanted lower half white so just the bars were red.
View attachment 71363
Long way from what she looked like now!
View attachment 71368
View attachment 71369
All Warn up front,shackles,fairlead, hook and Provantage 4500 wide spool, however waiting for the new synthetic rope. The business end of the Pioneer finished.
View attachment 71364
Shackle mounts are solid steel welded to and through the face of the bumper to the actual frame mounting points. No worries of pulling these out. Chose oversized hole in the mount and placed rubber tube inside so the shackles don’t rattle or move unless you want them too.
View attachment 71362

Yeah that’s pretty sweet. Got it looking good

 

[CumminsPusher]

Yeah that’s pretty sweet. Got it looking good

Still looking at the hood and fenders like we were talking about. Got a some stuff from eBay coming and might have some more decals made to tie it together, just not happy yet. Needs to look more factory.

 

[chadbo]

Still looking at the hood and fenders like we were talking about. Got a some stuff from eBay coming and might have some more decals made to tie it together, just not happy yet. Needs to look more factory.

Looked like a skull in the dark with the lights.... now to add some lit up teeth. The color looks more natural already with the red and white bumper, you do some pretty work

 

[pct]

That bumper looks great good idea and good work as always CP

 

[Barnstormer]

Thank you. It’s nice to be back at it. Couldn’t get enthused to save my life. Got only a couple days at it so far, need to try to find time quickly

Really is looking awesome!!!

 

[CumminsPusher]

Really is looking awesome!!!

Thank you very much. It’s getting there. Can’t explain how excited we are to finally have it the way we want it. It’s been a long road.