P1000m5 The Rebuild And Life Of "clutch".

CumminsPusher submitted a new Garage Item:

The Build And Life Of "clutch".

Build number 4 on a Pioneer starts now. Been a long road but no one can say I don't bleed red.
First pic
View attachment 60055

Read more about this showcase item here...

 

[Admin]

 

[elkguide]

Thank you very much. It’s getting there. Can’t explain how excited we are to finally have it the way we want it. It’s been a long, BUMPY road.

Fixed it for you CP.

 

[Admin]

 

[CumminsPusher]

Here’s the mounting for the rear winch. Didn’t show earlier but it had to come back off so here it is. Same exact setup as on PJ.
Had to drill holes in cross members in either side and fill the gap with spacers so it wouldn’t collapse. Trim a little on top of the hitch. Welded steel tabs to a stock warn mount and welded a brace across the top from side to side. Simple.
Adds a TON of strength to the weak ass rear hitch as well.

 

[CumminsPusher]

Easiest way to install or remove a skid plate is use your skinny daughter lol

 

[CumminsPusher]

Added skid rails to beef it up a little. Probably weld later but used double back tape for the next weekend.

Jacked up in the rear till the side was off the ground where it’s really weak and no problem. Cheap and easy for now.

 

[Plumber32]

Tape? Really. That sob is going to fall off and blow your tire!

 

[CumminsPusher]

Tape? Really. That sob is going to fall off and blow your tire!

Not Ripsaws! They may come off and if so it’s only 8 buck loss. They are on pretty well and pressure to them only adds to the tape strength. You ever try to pull a molding off a car???
Again I will probably weld but for now it’ll help.
Just trying to get something for the weekend, if I need to build better I will but protect them for now

 

[Plumber32]

Not Ripsaws! They may come off and if so it’s only 8 buck loss. They are on pretty well and pressure to them only adds to the tape strength. You ever try to pull a molding off a car???
Again I will probably weld but for now it’ll help.

Like I said losing a step lol. C.p. 2 years ago wouldn't fly with tape! Lol

 

[CumminsPusher]

Like I said losing a step lol. C.p. 2 years ago wouldn't fly with tape! Lol

I agree! Better then nothing. Keep on me and I’ll weld those f***ers up tonight lol.

 

[CumminsPusher]

Forgot we needed the harness for the LED headlights but that came in yesterday
Got some light back!

 

[CumminsPusher]

A testament of WetSounds speakers, little bit of Tennessee mud and Stinking Creek water! This box works so well with the sub at 1.4 cu.ft. Slowly getting things ready to bump and bump good!

 

[elkguide]

A testament of WetSounds speakers, little bit of Tennessee mud and Stinking Creek water! This box works so well with the sub at 1.4 cu.ft. Slowly getting things ready to bump and bump good!View attachment 72186

Sure doesn't look like any Idaho mud that I've ever seen.

 

[CumminsPusher]

Sure doesn't look like any Idaho mud that I've ever seen.

Sad thing we realized the other day. PJ had never made it to our favorite camp spot last year because it was always dead. All that mud is from Tennessee. First time ever some of this equipment will be in St. Marie’s Idaho. Gotta hurry up only got 4 days till the ride with Tigermark

 

[elkguide]

Sad thing we realized the other day. PJ had never made it to our favorite camp spot last year because it was always dead. All that mud is from Tennessee. First time ever some of this equipment will be in St. Marie’s Idaho. Gotta hurry up only got 4 days till the ride with Tigermark

Wish that I lived closer. Love that area and would love to get away from this darned snow and 25* weather!!!!!

 

[CumminsPusher]

Wish that I lived closer. Love that area and would love to get away from this darned snow and 25* weather!!!!!

I was feeling like that forever. It’s finally getting nice here.

 

[CumminsPusher]

I always wanted the 52” a little lower and sucked up to the windshield more. The more out of danger the better. Here was my chance but I had to trim some out of the back of the lightbar to get it done,still has to allow the windshield to come out easier. I didn’t want a windshield mounted unit because it needed to come out when hot. Fixing slight annoyances as we go.

Also wanted it down low out of the drivers view. Closer.

 

[Smitty335]

I always wanted the 52” a little lower and sucked up to the windshield more. The more out of danger the better. Here was my chance but I had to trim some out of the back of the lightbar to get it done,still has to allow the windshield to come out easier. I didn’t want a windshield mounted unit because it needed to come out when hot. Fixing slight annoyances as we go.
View attachment 72198
View attachment 72200
Also wanted it down low out of the drivers view. Closer.

Nice!

 

[elkguide]

I always wanted the 52” a little lower and sucked up to the windshield more. The more out of danger the better. Here was my chance but I had to trim some out of the back of the lightbar to get it done,still has to allow the windshield to come out easier. I didn’t want a windshield mounted unit because it needed to come out when hot. Fixing slight annoyances as we go.
View attachment 72198
View attachment 72200
Also wanted it down low out of the drivers view. Closer.

WOW!!!! Outdoing yourself every time you do something more CP.

 

[Chooglin]

I always wanted the 52” a little lower and sucked up to the windshield more. The more out of danger the better. Here was my chance but I had to trim some out of the back of the lightbar to get it done,still has to allow the windshield to come out easier. I didn’t want a windshield mounted unit because it needed to come out when hot. Fixing slight annoyances as we go.
View attachment 72198
View attachment 72200
Also wanted it down low out of the drivers view. Closer.

That last pic actually made my nipples hard

 

[DPort]

What is the glass opening size of the Honda windshield?

 

[moparornocar]

What is the glass opening size of the Honda windshield?

His, like mine is chopped with custom fit glass.