P1000 Todd's 2018 Build

ToddACimer

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
3,685
15,587
113
Oshkosh, Wi
Ownership

  1. 1000-5
After last weekend and way too deep of water, I gave up on the stock intake.

IMG 20190616 141724
IMG 20190616 145322
IMG 20190616 151619
IMG 20190616 152314

49382
IMG 20190616 160054
 
Last edited:
ohanacreek

ohanacreek

My EcoBoost has I4WD
Moderator
Lifetime Member
Jul 25, 2013
11,346
32,050
113
Shelby County, Alabama
Ownership

  1. 1000-5
ToddACimer

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
3,685
15,587
113
Oshkosh, Wi
Ownership

  1. 1000-5
Incase anyone is looking to do this mod, here are the parts needed. I used a 3.25" hole saw.

2 90 degrees 3" elbows, 1 15" 3" pipe cut to 12.5" and 1 5" long 3" pipe. 3" intake inlet.

Break down of the parter and a link to order
2 of these
Hiwowsport 4-Ply High Performance 90 Degree Elbow Coupler Silicone Hose for Auto with T-clamps (3.0"(76mm)) Amazon.com: Hiwowsport 90 Degree Elbow 4-Ply High Performance Coupler Silicone Hose for Auto with T-Bolt Clamp (2.0''(51mm)): Automotive


1 of these
3" Diameter 3" Length Aluminum Straight Pipe Amazon.com: ETL Performance 211021 Aluminum Straight Coupler 3.15 Inch Diameter 3 Inch Length: Automotive

1 of these
Universal Black Snorkel Inlet Head 3"Inch Fit Off Road Mudding Air Intake Ram US | eBay

I used a section of 3" exhaust pipe to go through the hood. You will need 1 additional 3" clamp, 5 total
 
Last edited:
Adam490

Adam490

HFA Grand High Wizard
Lifetime Member
Supporting Member
Apr 7, 2019
8,082
60,974
113
Covington, LA
Ownership

  1. 1000-5

  2. Talon R LV
Same reason I did mine; found a hole that used to be 12" deep was over my headlights when I went back through. I went through the hood just because it was easier, but I do like it relocated off to the side. Did you have the light mounted back there on your previous build? Curious to how it handles the heat.
 
  • Like
Reactions: BWAF
ToddACimer

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
3,685
15,587
113
Oshkosh, Wi
Ownership

  1. 1000-5
Same reason I did mine; found a hole that used to be 12" deep was over my headlights when I went back through. I went through the hood just because it was easier, but I do like it relocated off to the side. Did you have the light mounted back there on your previous build? Curious to how it handles the heat.

I do not have a light mounted on the lower windshield.
 
  • Like
Reactions: BWAF
Adam490

Adam490

HFA Grand High Wizard
Lifetime Member
Supporting Member
Apr 7, 2019
8,082
60,974
113
Covington, LA
Ownership

  1. 1000-5

  2. Talon R LV
Sorry, was referring to this guy you mounted near the muffler

ToddP1k
 
  • Like
Reactions: BWAF
Remington

Remington

POIDH Enforcement Officer
Lifetime Member
Supporting Member
Jul 24, 2016
20,253
115,818
113
Michigan
Ownership

  1. 1000-5

  2. Talon X
  • Like
Reactions: JTW and BWAF
advertisement
J

JTW

Guest
Looks good! I like it.
But for the record, mine has been through the hood for 4 years and you actually don’t know it’s there unless your starring at it o_Olol. Dosnt even effect the light bar when it’s on.
I agree.. I haven’t ever been bothered by mine through the hood. But I do like his setup
 
  • Like
Reactions: Tigermark and BWAF
ToddACimer

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
3,685
15,587
113
Oshkosh, Wi
Ownership

  1. 1000-5
You already broken an axle?
Yup. Buried it over the doors twice on the first ride out with the wife and kids. Snapped the left front shaft while winching. Very unsuccessful first ride, 8 miles in 3 hours. 1 broken tree saver, broken front left shaft, bent front bumper. We ended up winching 5 times and getting pulled through a hole once.
 
Gumby

Gumby

Active Member
Mar 9, 2018
49
104
33
Freedom, WI
Ownership

  1. 1000-5
Yup. Buried it over the doors twice on the first ride out with the wife and kids. Snapped the left front shaft while winching. Very unsuccessful first ride, 8 miles in 3 hours. 1 broken tree saver, broken front left shaft, bent front bumper. We ended up winching 5 times and getting pulled through a hole once.


Pipeline? Even the access roads coming out of Breed are 2 ft deeper than normal!
 
  • Like
Reactions: Biteme
ToddACimer

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
3,685
15,587
113
Oshkosh, Wi
Ownership

  1. 1000-5
I ran 220ish miles last week and had a really good time. I need to take a little preload out of the front springs but otherwise I really like it.

I got my Uni filter cover for my snorkel today. Should work well for picking up dust.

IMG 20190701 175630


Didn't get any riding photos last week
IMG 20190626 165414
 
BWAF

BWAF

I get paid to pass gas
Lifetime Member
Jan 24, 2018
8,864
42,478
113
Carthage MO
Ownership

  1. 1000-5
I ran 220ish miles last week and had a really good time. I need to take a little preload out of the front springs but otherwise I really like it.

I got my Uni filter cover for my snorkel today. Should work well for picking up dust.

View attachment 139303

Didn't get any riding photos last week
View attachment 139304
Like the cover

Sent from my SM-G930U using Tapatalk
 
Adam490

Adam490

HFA Grand High Wizard
Lifetime Member
Supporting Member
Apr 7, 2019
8,082
60,974
113
Covington, LA
Ownership

  1. 1000-5

  2. Talon R LV
I ran 220ish miles last week and had a really good time. I need to take a little preload out of the front springs but otherwise I really like it.

I got my Uni filter cover for my snorkel today. Should work well for picking up dust.

View attachment 139303

Didn't get any riding photos last week
View attachment 139304
Nice, I like that filter. Have a link?
 
  • Like
Reactions: Biteme and BWAF
advertisement

Similar threads

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!