D
I've had my utility trailer for 4 years. I bought it to haul my Grizzly 700 and keep in in our garage so I didn't want a trailer too long. Our Pioneer 520 "almost" fit. I made two straps to hold the ramp at an angle out of flat steel from Home Depot (3/16"x1.5"x48" (cut in half) ). I bought two cat 1 QD PTO pins (5/8" diameter). I used two 3/8" diameter bolts to mount the straps to the frame. I went with tie down straps that secure the front tires to keep the UTV in place.
![WDBo8F3 WDBo8F3](https://hondasxs.com/data/attachments/430/430447-f2162b728efbaceb31f322e30ed8fee4.jpg)
![PGQxCVB PGQxCVB](https://hondasxs.com/data/attachments/430/430448-f451a3a1fa2de73bfcc37fe9b7362467.jpg)
![9ciCEvE 9ciCEvE](https://hondasxs.com/data/attachments/430/430449-5032827b6aa9c09eb1e02f20bbf75077.jpg)
![CMrehTM CMrehTM](https://hondasxs.com/data/attachments/430/430450-88461dfacdc5532d323996a248ceca55.jpg)
![WDBo8F3 WDBo8F3](https://hondasxs.com/data/attachments/430/430447-f2162b728efbaceb31f322e30ed8fee4.jpg)
![PGQxCVB PGQxCVB](https://hondasxs.com/data/attachments/430/430448-f451a3a1fa2de73bfcc37fe9b7362467.jpg)
![9ciCEvE 9ciCEvE](https://hondasxs.com/data/attachments/430/430449-5032827b6aa9c09eb1e02f20bbf75077.jpg)
![CMrehTM CMrehTM](https://hondasxs.com/data/attachments/430/430450-88461dfacdc5532d323996a248ceca55.jpg)