P1000 Transmission parts breakdown?

[Greasemonkey]

Hi all! First post here. Long story short I bought a pile of parts that resemble a 2016 P1000-5 and I’m looking for some help finding the right parts. I am looking for a parts picture for “gasket kit B” as listed on almost all the parts websites. I need a few gaskets for the transmission and can’t seem to find anything showing which is which anywhere.

any help is appreciated,

Justin

 

[Admin]

 

[tjoreo]

Didn't know if you had any luck with this? I didn't want to see it get lost down the line, but I'm sure I can't help you much. @HondaTech or @CumminsPusher might be one's that can help on this. It's good seeing another Idaho boy on here and hope you find what you need.

 

[CumminsPusher]

Didn't know if you had any luck with this? I didn't want to see it get lost down the line, but I'm sure I can't help you much. @HondaTech or @CumminsPusher might be one's that can help on this. It's good seeing another Idaho boy on here and hope you find what you need.

I always went to the dealer to get part numbers if had issues. @snuffnwhisky is solid and may have a breakdown

 

[HondaTech]

Even our dealer parts fiche doesn't show a picture of what's in there.

Gasket kit B does give you the sub trans case gasket and the 1 that goes between the rear half and the engine.

 

[Greasemonkey]

Thanks for the replies. That’s what I ran in to as well. Ended up spending about 3 hours digging through my service manual and was able to decipher the breakdown partzilla had. Got my parts ordered now just have to go rip the engine back out of it.........

 

[CumminsPusher]

Well @Greasemonkey welcome to the club. So what happened, what ya fix?

 

[tjoreo]

Thank you guys for the reply. I was just trying to give a new guy a little help on something I hope I never have to tear into. Best of luck @Greasemonkey

 

[Greasemonkey]

So this is how I picked mine up. Previous owner picked it up at an insurance auction with a busted left front upper a arm and a rod knock. He fixed the a arm, put a new crank rods and rings in it and couldn’t get it to start afterwards. I picked it up CHEAP...... and I’m a mechanic so I figured why not. My buddy/hunting partner has a 16 as well so I have one to look at in case I need help (he’s a member on her not sure his user name tho. Alumalite armor cab and tracks on his rig)

I got it home and tinkered with it for a while and found out the key didn’t get put back in the flywheel so timing was way off. Got it to run but it’s puking oil out the transmission. hopefully it sealed up and go for a cruise!

 

[TripleB]

View attachment 167268 View attachment 167270 View attachment 167269 So this is how I picked mine up. Previous owner picked it up at an insurance auction with a busted left front upper a arm and a rod knock. He fixed the a arm, put a new crank rods and rings in it and couldn’t get it to start afterwards. I picked it up CHEAP...... and I’m a mechanic so I figured why not. My buddy/hunting partner has a 16 as well so I have one to look at in case I need help (he’s a member on her not sure his user name tho. Alumalite armor cab and tracks on his rig)

I got it home and tinkered with it for a while and found out the key didn’t get put back in the flywheel so timing was way off. Got it to run but it’s puking oil out the transmission. hopefully it sealed up and go for a cruise!

Your garage looks like mine. Lol

 

[Greasemonkey]

Your garage looks like mine. Lol

That’s the previous owners LOL. But mines not a ton better

 

[CumminsPusher]

Oh f***! @Greasemonkey I recognize that rig and I’m not sure you want to put a ton of money in it

 

[joeymt33]

Yeah, walk away slowly and then run like hell!

 

[snuffnwhisky]

Burn it, then burn the remains again, then bury it, then gasoline the ground and burn it again.

 

[ohanacreek]

Claim insurance on it and send it to some other poor bastard. You don’t want that rig.

 

[snuffnwhisky]

Ole Puddle Jumper haha

 

[Plumber32]

Small world isn't it. That thing must be christine!

 

[ohanacreek]

@Greasemonkey seriously don’t try to
resurrect Puddle Jumper, I’m sorry you ended up
with it.

 

[CumminsPusher]

Small world isn't it. That thing must be christine!

Even smaller knowing you rode with the OP’s buddy

 

[popeye]

Even smaller knowing you rode with the OP’s buddy

Yea what was his name...? I forget Idaho something, but I think he went home the first morning plumber was there


Sent from my iPhone using Tapatalk

 

[CumminsPusher]

Yea what was his name...? I forget Idaho something


Sent from my iPhone using Tapatalk

IdahoPioneer.