P1000m5 What about a trailer to haul one around in?

[Digger]

What is everyone using to haul their Pioneers around.I have found the height to be an issue with some
enclosed models.What is everyone doing? I'm looking for options.Thinking maybe 2 trailers,one enclosed for long hauls and a little utility to just buzz it from ranch to ranch.

 

[Admin]

 

[Stauvo]

I use my 18' 12000 lb. ABU Bobcat trailer. I'M hopping to fit two sxs's on it with little modification. It's a 2001 model and was junk but we completely rebuilt it along with new 1/4 plate fenders. Looks brand new!

 

[Tot]

I plan on getting a 7x14 tandem axle trailer to haul mine with. I would love an enclosed trailer, but it too expensive for me. $1,700 vs $5,000.

 

[Jack39]

I used to haul my Teryx on the back of my F150, using a Diamondback ATV tonneau cover with extensions. It really worked out very well for me, but my wife didn't like it at all. She was afraid of being top heavy, but it wasn't top heavy at all. Nowhere near as bad as a truck camper. Another big benefit was that my tools and gear were secure and out of the weather. I wound up spending the big bucks and had an 8 and a half foot aluminum bed built with cabinets under for storage. When I was done with that, she said, "I really don't like riding". Oh well,,, the dog likes to ride, so I won't have to ride alone

 

[ofrcboy]

I use a 10k tandem 18' Utility, usually haul a RZR behind my 1000-5 DL

 

[nbomar]

44' toyhauler and a 8x12 tractor supply special for short trips.

 

[Sxsnewbie]

POS homemade 10x6. Boards held on by a ratchet straps. Probably cost me $200 and most of that was new lights and wire all around.

 

[ofrcboy]

44' toyhauler and a 8x12 tractor supply special for short trips.

You must just go to big places with that 44 footer, thats a big one.

 

[nbomar]

You must just go to big places with that 44 footer, thats a big one.

It doesn't bother me near as much as it used to. I can fit it in some right places. Heck putting it into my storage I have to jack knife it and I still clear the doors by maybe 1-2" on each side and the front bumper of my truck is inches from the wall of the other side of the storage units. I usually get spectators every time I put it in or take it out.

 

[Scooterchris]

6x12 single axle triple crown utility trailer. Pull it with 2015 rav4 xle......lol

 

[Stauvo]

POS homemade 10x6. Boards held on by a ratchet straps. Probably cost me $200 and most of that was new lights and wire all around.

Lol! As long as it gets your ride there right? I was forced to rebuild when the Foreman finally dropped through.

 

[ghost]

7x14 enclosed v-nose with 6" extended height.
Got the bottom linexed

 

[tundraman]

6.5 by 12 single axle trailer.

 

[wyo700]

I found a 12 foot two place snow machine trailer. Works great and got a great deal. Replaced all the wood today.

 

[Johnny_C]

I bought a 6.5' x 10' single axle.
$1300.

I would like an enclosed, as well,
but I can't swing $5k on that right
now.

John

 

[Delton]

77" x 12' single axle. Funny thing is I just bought it 2 months ago. I told the wife all we needed now was more toys to haul it with. Hadn't even considered a sxs at the time. Guess it was fate. Kept my 5x8 to pull around house with the foreman

 

[allgm1]

6.5x12 utility...just in case I need to bring the pioneer somewhere with the plow on. I bought an older one, they seem to be built a little more robust. I too would like an enclosed but its not in my budget right now.

 

[sporttrac4x4]

I have a 6.3' by 12' single axle work's great for hauling my pioneer 1000-5.

 

[vince]

77inchx12 foot works well

 

[moparornocar]

7x12 Rice single axle with side load ramps. Pull it with the matching 2015 Grand caravan. Pulls great, the van has an exhaust, intake and a chip and puts out about 300hp though.