P1000 Yet another snorkel

[pct]

Here is what I come up with not got to test it and it does require the removal or the center seat belt and I found some looks to a high flow 2" fittings at lowes they dont have the restriction that the others have here it what I have come up with all ideas are welcome it fits between the seat back and bed a little snug but will work here is a better pic will post some with it all back together

 

[Admin]

 

[elkguide]

Interesting. Home much do you hear it in the cab?

 

[pct]

not sure will let you know not bad in the shop though

 

[Smitty335]

Here is what I come up with not got to test it and it does require the removal or the center seat belt and I found some looks to a high flow 2" fittings at lowes View attachment 50498they dont have the restriction that the others have View attachment 50499here it what I have come up with all ideasView attachment 50500 are welcome it fits between the seat back and bed a little snug but will work here is a better pic will post some with it all back togetherView attachment 50501

That's what Iv'e thinking, except borrow a conduit heater from an electrican and bring it up the out side rops and 90 it backwards and do the same with a blower for heat on the other side, up and out!

 

[pct]

I'm not done on this one yet still thinking on the top of it and how it is going to go planing on a filter at the end also my cage is some what different since I chopped it still have plenty of fittings and pipe HaHa

 

[pct]

Here is a rear pic not done yet

 

[Delton]

I like it. Looks good.

 

[Mdtfc]

I like the idea, not sure my wife would like it sucking air right behind her head though!

 

[Smitty335]

I like the idea, not sure my wife would like it sucking air right behind her head though!

Same thing same as you snoring right at her head, HA!

 

[Nipper]

Let us know on the noise.....nice set up man.

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

[Dragon21]

Your ride is to clean haha.

Not bad, however a passenger may or may not have a lot of noise. I know the HL one come up right next to the passenger head too, so maybe it will be fine?

 

[pct]

Yes it is to clean I haven't had a chance to get it out much since I got it back hopefully this weekend and I will let everyone know about the noise from the snorkel too I do't think it will to bad

 

[Donnie]

I have a snorkel that is in the exact same place and it made no difference in noise for what it's worth.

 

[pct]

Had a chance to go for a short ride the noise on the snorkel is not bad you cant here it for the stock tire noise HaHa

 

[Smitty335]

Here is what I come up with not got to test it and it does require the removal or the center seat belt and I found some looks to a high flow 2" fittings at lowes View attachment 50498they dont have the restriction that the others have View attachment 50499here it what I have come up with all ideasView attachment 50500 are welcome it fits between the seat back and bed a little snug but will work here is a better pic will post some with it all back togetherView attachment 50501

You've got a 700 right? Freaked me out looking at your pictures, I thought you were bringing unfiltered air into your engine. The P1's are different.

 

[pct]

done and tested rode 90 miles noise not bad still planning on a pre filter later

 

[pct]

It is a 1000 Smitty I used the stock intake and ran it from there

 

[Smitty335]

It is a 1000 Smitty I used the stock intake and ran it from there

My bad, I thought I was looking at the back of the motor, HA!

 

[pct]

Not a problem my pics arent the best HaHa

 

[pct]

I think the noise level is not bad because the restriction is not as bad with the bigger fittings and not as many fittings used if that makes any sense