BOX1

P500 2021 Pioneer 500?

H

hondabob

Well-Known Member
Lifetime Member
May 14, 2013
1,155
4,490
113
Prescott Valley, AZ
Ownership

  1. Other Brand

  2. 1000-3
There should be a Pioneer 500E electric model. Honda had pictures of it a few years ago. I want a Pioneer 520 with all the good stuff that is on the Foreman Rubicon. We have several 50 inch trails here and a couple need a locker on the switch backs plus some really tough rock crawling canyons.
 
H

hondabob

Well-Known Member
Lifetime Member
May 14, 2013
1,155
4,490
113
Prescott Valley, AZ
Ownership

  1. Other Brand

  2. 1000-3
Slide4
Honda power 620x647
Slide2
Slide3
 
  • Like
Reactions: Mudder and Mudwing
H

hondabob

Well-Known Member
Lifetime Member
May 14, 2013
1,155
4,490
113
Prescott Valley, AZ
Ownership

  1. Other Brand

  2. 1000-3
1border4manu

1border4manu

Well-Known Member
Supporting Member
Jul 4, 2019
2,133
14,385
113
Zephyrhills, Florida
Ownership

  1. 500
Maybe Honda will make a 50 inch Talon for 2021 with the 520 motor. Wishful thinking.
 
The Green Goat

The Green Goat

LGBTQ Compliance Officer -Lotta gays in this place
Lifetime Member
Supporting Member
Sep 7, 2020
1,705
12,041
113
Ohio
Ownership

  1. 520
Jerryg

Jerryg

Well-Known Member
Sep 24, 2020
9,951
81,829
113
NEPA
Ownership

  1. Other Brand
It would be nice if they pre-install the winch mount.

I was looking at the 16 pages worth of installation instructions and was thinking, that's a days worth of work.
 
  • Like
Reactions: Mudwing
G

gtistiffler

Guest
There should be a Pioneer 500E electric model. Honda had pictures of it a few years ago. I want a Pioneer 520 with all the good stuff that is on the Foreman Rubicon. We have several 50 inch trails here and a couple need a locker on the switch backs plus some really tough rock crawling canyons.
You can do a 520 big bore if you wanna open up your engine
 
  • Like
Reactions: J80
906UP

906UP

Well-Known Member
Lifetime Member
Supporting Member
Club Contributor
Jul 6, 2017
12,811
118,993
113
The 906
Ownership

  1. 1000-3

  2. Talon X
You can do a 520 big bore if you wanna open up your engine
That's my plan for the Donkey this winter, it's starting to use a little oil, not enough to warrant a top end rebuild but that's the excuse I'm using :cool:
Going to use the OEM 520 Foreman cyl, piston, rings.
 
906UP

906UP

Well-Known Member
Lifetime Member
Supporting Member
Club Contributor
Jul 6, 2017
12,811
118,993
113
The 906
Ownership

  1. 1000-3

  2. Talon X
Better do some checking first,Crank Shaft part #'s are not the same.
Not sure what model you were checking but the 21 Foreman 520 FM1 (manual shift) has the same crank, the stroke is the same, only the bore increased in size. The cyl "should" be a bolt on, at worst the cases may require some finesse to accommodate the larger cyl liner.
 
BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!