P1000 Anyone found interchangeable shocks?

SundayRdr

SundayRdr

Well-Known Member
Mar 1, 2016
575
1,179
93
McMinville Tn
Has anyone found a set of interchangeable stock replacement shcoks the the p1000-5 like Green02crew posted for the Commander shock swap on 700's? We noticed a lf shock leakimg fluid on buddy's 1000-5 and would like a better than stock shock but not spend $2000 on a set. Any ideas or suggestions ????
 
Ridem32

Ridem32

Well-Known Member
Apr 28, 2016
938
848
93
Terry
Whole set $1,400 free shipping no tax 9d3459094597a8cb77e57a133be005c0


Sent from my iPhone using Tapatalk
 
Brett002

Brett002

Well-Known Member
Feb 28, 2017
254
846
93
Bangladesh
Ownership

  1. 500

  2. Talon R
I joined today to make my first post here.

So a buddy of mine had a renli sxs and he upgraded the shocks to the elka's. He had the stock shocks laying around and decided to give them to me. I held them up to my tock shocks and they looked to be the same in a lot of ways, but the one thing I noticed was the eye to eye was a bit longer. This got me thinking... What if I bolted these on to achieve lift?
So after several weeks of scrubbing with 28" mud lites. I'm now running 30x11-14 zillas at all four corners. Stock suspension rear. Added renli shocks up front. The cv's are in no more of a bind than they would be with the highlifter kit.

I can take pictures for anyone who wants to see.

It raises the question could we just call Fox, Walker Evans, Elka, and have them extend the eye to eye to achieve a small lift?

I am currently running the renli stock spring and the rebound sucks. I have been researching options to have the shocks shipped to someone and dual rate springs installed.
 
SundayRdr

SundayRdr

Well-Known Member
Mar 1, 2016
575
1,179
93
McMinville Tn
What is a renli sxs? I know a guy that revolves and springs shocks but it's not cheap.
 
Last edited:
Brett002

Brett002

Well-Known Member
Feb 28, 2017
254
846
93
Bangladesh
Ownership

  1. 500

  2. Talon R
It was a renli 1100.

renli 1100 - Google Search

Some sort of Chinese made street legal buggy. [HASHTAG]#junk[/HASHTAG]

The shock I feel is fine, the springs are just stiff. If I could get those replaced with a dual rate set I'd be in the clouds again.
 
Ridem32

Ridem32

Well-Known Member
Apr 28, 2016
938
848
93
Terry
The fox shocks can be adjusted. I bet you can get 3 inches of lift from the fox shock.


Sent from my iPhone using Tapatalk
 
eastenn

eastenn

Well-Known Member
Dec 18, 2016
220
469
63
Bristol TN
www.fb.com
Ownership

  1. 700-4
The fox shocks can be adjusted. I bet you can get 3 inches of lift from the fox shock.


Sent from my iPhone using Tapatalk

When you add more preload on the springs to gain height you're going to lose some ride quality mostly at slow speed or over small bumps.

The spring compresses the easiest at its longest length, so when you add preload you are losing that length of spring to be used as a cushion.

(Unless the fox shocks are adjustable in another way besides adding preload, then just ignore my post ;))
 
Ridem32

Ridem32

Well-Known Member
Apr 28, 2016
938
848
93
Terry
I think everyone will be cranking them down some lol


Sent from my iPhone using Tapatalk
 
advertisement
Smitty335

Smitty335

Well-Known Member
Lifetime Member
Supporting Member
Oct 3, 2016
35,362
207,989
113
NWA Arkansas
Ownership

  1. 1000-3

  2. 1000-5
Compared to Elka's price is 4 for 2
 
  • Like
Reactions: joeymt33
Smitty335

Smitty335

Well-Known Member
Lifetime Member
Supporting Member
Oct 3, 2016
35,362
207,989
113
NWA Arkansas
Ownership

  1. 1000-3

  2. 1000-5
When you add more preload on the springs to gain height you're going to lose some ride quality mostly at slow speed or over small bumps.

The spring compresses the easiest at its longest length, so when you add preload you are losing that length of spring to be used as a cushion.

(Unless the fox shocks are adjustable in another way besides adding preload, then just ignore my post ;))
I talked to a Elka tec a few days about spring sag, What he told me was, install shocks and adjust to the factory ride height, then sag (spring preload) is correct. What I forgot to ask was with out normal weight load or with.
 
Smitty335

Smitty335

Well-Known Member
Lifetime Member
Supporting Member
Oct 3, 2016
35,362
207,989
113
NWA Arkansas
Ownership

  1. 1000-3

  2. 1000-5
I talked to a Elka tec a few days about spring sag, What he told me was, install shocks and adjust to the factory ride height, then sag (spring preload) is correct. What I forgot to ask was with out normal weight load or with.
Got the scoop from Elka tec support on spring adjustment, kind of like a dirt bike. Put a simulated load you will be caring including you and passengers, set ride height and your set.
 
  • Like
Reactions: Ridem32
SundayRdr

SundayRdr

Well-Known Member
Mar 1, 2016
575
1,179
93
McMinville Tn
purchased these as well and they are awesome. I also have my factory shocks for sale if your interested.
Are you going to be at the RB ride in april and what do you want for the fonts if your going to be there?
 
strongbuilt

strongbuilt

Well-Known Member
Sep 7, 2017
260
606
93
Utah
Ownership

  1. 1000-5
Has anyone put on the fox shock from the 16-19 terex? It seems to be about 3/4" taller is all, I can tell.
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!