P1000 Auto start been done?

[OleRed]

So, had to ask the question. May sound a bit crazy but with this group, what doesn’t !? Anyone have it installed?

 

[Admin]

 

[elkguide]

We're all anxiously waiting for your install and write up.
With pictures a diagrams we hope!!!!!)(

 

[Plumber32]

So, had to ask the question. May sound a bit crazy but with this group, what doesn’t !? Anyone have it installed?

You talking remote start?

 

[OleRed]

yes

 

[Neohio]

Shouldn't be too hard.
If you need wiring help, tell me your model year and the system you'd like to install. I should be able to help you.

 

[Farmer]

I'd consider buying a cab for my 700 if it had remote start.

 

[OleRed]

I wouldn’t think it would be to hard— there are a lot of folks that have explained nearly every wire in the machine— people have a good brand?

 

[Neohio]

I wouldn’t think it would be to hard— there are a lot of folks that have explained nearly every wire in the machine— people have a good brand?

Depends on what you want. I believe Viper was top of the line for a long time. But I have been out of that game a long time.
Do you want simple 1/8 or 1/4 mile range? Need remote feedback with alarm etc?

 

[Neohio]

My biggest concern would be sealing your wire connections to keep the elements out. Much easier in a vehicle where all connections are done under dash where weather/mud/water is not a concern.

 

[OleRed]

I would just want one way 100 yards or so. Nothing too fancy just need to warm up from ice shack or inside the house

 

[Plumber32]

I would just want one way 100 yards or so. Nothing too fancy just need to warm up from ice shack or inside the house

I've seen it on snowmobiles.

 

[Neohio]

I'd try something like this.

https://www.amazon.com/Viper-Remote-Start-System-4115V1B/dp/B00HY0A5PE/?tag=sxsweb24-20

 

[OleRed]

Thanks Neo— Should be sometime between seasons coming up here and I will give it a go

 

[Neohio]

Thanks Neo— Should be sometime between seasons coming up here and I will give it a go

I couldn't find a wiring diagram for the remote start, if you come across one, I'll tell you where to hook em up.

 

[OleRed]

Reading reviews it says they email it to you when you buy.

 

[OleRed]

I am ordering today.

 

[jwfirebird]

any of the dei brands are good, viper is one, like ten I think, I would solder and heat shrink every connection. only input I would question is the tach signal for reading when the engine starts to shut it off. some only work with certain cyl like they have jumper settings for 4 6 or 8 cyl, but some of the better ones will have auto read function that may work better

 

[Neohio]

I think the viper monitored battery voltage to verify it was running. I don't recall 100% though.

 

[OleRed]

Do they commonly list the cyl options in specs on the auto start products? Trouble is, I can't get any real details on this thing until I order... says the bible of reviews on amazon

 

[tjoreo]

I've installed some of the Ready remotes (now DEI) on about 4 different vehicles and they seem to work very well. I was just looking but they seem to have changed there website so you can't look at vehicle specific wiring diagrams without a bar code of the product. The ones I've installed don't work off a tach signal, but rather run the starter for a few seconds then check voltage. They are pretty straight forward and I believe for the pioneer, they would be pretty easy to install. Unlocking doors and tooting the horn might be a little tricky though.