Farm Rig

joeymt33 submitted a new Garage Item:

Farm Rig

Well, I said I wouldn't do much to this one..... it still won't get all the mods that Traveller II got.

Read more about this showcase item here...

 

[Delton]

So the Farm Rig will be coming along on the Royal Blue to Windrock trip. Time to get to work.

Mounted the Bussman PDM and True battery Isolator.
View attachment 51962

You driving Farm rig or your dad?

 

[Delton]

Then I used my old Auto leveling rear shocks as an upgrade for the rear.

View attachment 51966

While in there, I forgot to put the rear sway bar back on!
View attachment 51967

Dang we all must be getting old cause that bar gets forgotten alot lol.

 

[joeymt33]

You driving Farm rig or your dad?

My brother will drive it. He's not too bad and will need to be on one of the easier routes....if there is one!

 

[moparornocar]

So the Farm Rig will be coming along on the Royal Blue to Windrock trip. Time to get to work.

Mounted the Bussman PDM and True battery Isolator.
View attachment 51962

Awesome! You know I'm partial to white ones!

 

[Delton]

My brother will drive it. He's not too bad and will need to be on one of the easier routes....if there is one!

Cool I look forward to meeting him.

 

[joeymt33]

Crap! Bed won't dump with reverse lights where i put them. I'll get a solution for that ins. Few days.

 

[joeymt33]

Not sure why I see an oil leak here....



This is the valve cover gasket. :-(

 

[sharp]

Not sure why I see an oil leak here....

View attachment 52009

This is the valve cover gasket. :-(

More than likely it Could be some old chainsaw oil or something that leaked on it hopefully.

 

[joeymt33]

More than likely it Could be some old chainsaw oil or something that leaked on it hopefully.

I wish! It was all round on all sides. I check the 3 cover bolts and they were tight.

I'll leave it alone for now and just keep a watch on it.

 

[Delton]

Crap! Bed won't dump with reverse lights where i put them. I'll get a solution for that ins. Few days.

Same here. Mine dumps but hits lights. I been looking for an excuse to use flat ones anyways and use these for work lights on tractor.

 

[joeymt33]

The farm Rig supposed to go to Bull Run tomorrow and I've only got the super ATV arms on one corner! Somehow this evening I've got to finish that up and put on skid plates and then get them both on the trailer.

 

[Delton]

The farm Rig supposed to go to Bull Run tomorrow and I've only got the super ATV arms on one corner! Somehow this evening I've got to finish that up and put on skid plates and then get them both on the trailer.

View attachment 53124

You better get on the ball!! All I gotta do is swap tires/wheels out. It needs to stop raining so I can load tonight.

 

[ohanacreek]

Gonna have to change the name to Traveller 2.5 if you keep this up.

 

[popeye]

The farm Rig supposed to go to Bull Run tomorrow and I've only got the super ATV arms on one corner! Somehow this evening I've got to finish that up and put on skid plates and then get them both on the trailer.

View attachment 53124

If those are the spot lights and not the flood type you should be pretty happy with them. I run them as fog lights on the service truck, they will project out a good 300 yards.

Sent from my XT1565 using Tapatalk

 

[joeymt33]

If those are the spot lights and not the flood type you should be pretty happy with them. I run them as fog lights on the service truck, they will project out a good 300 yards.

Sent from my XT1565 using Tapatalk

They are nice, I had one as the reverse light on Traveller. It doesn't work good for reverse though.

The plan is to have three on the front of Farm Rig but I couldn't find one the other day.

 

[joeymt33]

Got the front done it now moved on to the back.

 

[joeymt33]

Put some shock spacers up front. Not sure about these as I haven't used them before.

 

[elkguide]

Got the front done it now moved on to the back.

View attachment 53133

View attachment 53134

I don't really get jealous of much BUT to have a lift in the shop....................

 

[ohanacreek]

I don't really get jealous of much BUT to have a lift in the shop....................

Or the cheap route is to have a friend with a lift.

 

[GlockMeister]

Got the front done it now moved on to the back.

View attachment 53133

View attachment 53134

Seems like you're getting good at that
I think ill just bring mine down and let you do it