P1000 NBomars tinkering and silly stuff

[my99svt]

It's a 60x100 shop. My father in laws place. He has more stuff than I would know what to do with. @my99svt it's a 67 camaro. That S10 is a blown pro street high 6's in the quarter mile.


Sent from my iPhone using Tapatalk

I had a '67, my favorite year!

 

[Admin]

 

[elkguide]

I know for a fact on the road it runs off the street, through a fence, over a stop sign, and into the ditch on the other side real fast!

I hope that that wasn't during an introduction to the family tour.

 

[nbomar]

I hope that that wasn't during an introduction to the family tour.

He actually did it last time he had it out... I just watched it happen. Thank the lord it wasn't me driving!


Sent from my iPhone using Tapatalk

 

[Plumber32]

stay safe the southern edge of the system might get to us early in the morning.


When we built I based our garage depth off of a Ram Crew cab mega cab 8' Bed and the garage door height off a lifted 1000 with hard roof haha. PLENTY of room for my Silverado Crew with 5'8" bed.

The megacab only comes with the 6'4" bed. Unless you stretch it.

 

[nbomar]

Bighorns leaking again. They got several thousand miles on them so I guess we got good use from them. Red neck floor jack.


Sent from my iPhone using Tapatalk

 

[nbomar]

Dad asked me "can that Honda haul anything?" Haha. I had to carry all the feed up and feed cattle. Lol


Sent from my iPhone using Tapatalk

 

[nbomar]

Should have left this guy a bull. Less than a week old and he was a tough guy! Hard to hold while tagging and bagging.


Sent from my iPhone using Tapatalk

 

[elkguide]

Bighorns leaking again. They got several thousand miles on them so I guess we got good use from them. Red neck floor jack.

What's the "redneck" part?

 

[nbomar]

What's the "redneck" part?

The hay spike on the front of the tractor. Can say man city folk use this method...


Sent from my iPhone using Tapatalk

 

[elkguide]

The hay spike on the front of the tractor. Can say man city folk use this method...

Looks like common sense not redneck to me.

Once any of those city folks tried a tractor with a bale spear or fork, they'd never go back to anything else!

 

[Smitty335]

What's the "redneck" part?

Is he getting married? HA!

 

[nbomar]

Since I am installing a new lower switch panel I figured I should at least do it right so I don't have to re-do it. I'm ok at wiring (it all works) but have no vision for clean organized wiring. Which one of you wiring gurus wants to help with this. I'm waiting on rocker switches but everything else is in already. Honda switch plate and wiring, bilge fan, led pods for 45* angle lights up front. Adding a winch power switch also so my rocker for in/out isn't always hot. I bump that thing all the dang time.

@Tigermark @my99svt


Sent from my iPhone using Tapatalk

 

[my99svt]

As long as you have something other than near beer I'm in!


Sent from my iPhone using Tapatalk

 

[nbomar]

As long as you have something other than near beer I'm in!


Sent from my iPhone using Tapatalk

Just so happens I probably have more alcohol than most people you know. Lol. We just have to make sure we get done before you have too much. Afterwards, it's whatever you want! I can even bring my stuff to tulsa if that works.


Sent from my iPhone using Tapatalk

 

[my99svt]

We can do this at Mulberry or Mena some weekend. Shouldn't take to long!


Sent from my iPhone using Tapatalk

 

[nbomar]

We can do this at Mulberry or Mena some weekend. Shouldn't take to long!


Sent from my iPhone using Tapatalk

Ok sounds good!


Sent from my iPhone using Tapatalk

 

[Tigermark]

Ok sounds good!


Sent from my iPhone using Tapatalk

Set up a weekend and we can ride and rewire!

I need a shakedown run on mine to make sure everything is good for takeover.

 

[Smitty335]

Since I am installing a new lower switch panel I figured I should at least do it right so I don't have to re-do it. I'm ok at wiring (it all works) but have no vision for clean organized wiring. Which one of you wiring gurus wants to help with this. I'm waiting on rocker switches but everything else is in already. Honda switch plate and wiring, bilge fan, led pods for 45* angle lights up front. Adding a winch power switch also so my rocker for in/out isn't always hot. I bump that thing all the dang time.

@Tigermark @my99svt


Sent from my iPhone using Tapatalk

Sounds like Mission Control project

 

[Smitty335]

We can do this at Mulberry or Mena some weekend. Shouldn't take to long!


Sent from my iPhone using Tapatalk

my99svt you are a good sport

 

[my99svt]

my99svt you are a good sport

Get r done!


Sent from my iPhone using Tapatalk