P500 Need help

[marty lawson]

I have p500 it idles but no accelartion an will not shift into no gears showing code 18 N light flashes have changed TP sensor angel sensor no change checked battery too can i please get some help

 

[Buggyman]

I have p500 it idles but no accelartion an will not shift into no gears showing code 18 N light flashes have changed TP sensor angel sensor no change checked battery too can i please get some help

welcome from Ohio. I'm sure one of these gurus will be along to help out soon. probably going to need more info as year ,miles .

 

[Remington]

I have p500 it idles but no accelartion an will not shift into no gears showing code 18 N light flashes have changed TP sensor angel sensor no change checked battery too can i please get some help

Welcome from the once not run by Commy’s Michigan!

Need pics of your rig to start with!
Pics Or It Didnt Happen!

 

[Red500]

Somebody will be along to help shortly.
Welcome to the club from East Tennessee.

 

[marty lawson]

welcome from Ohio. I'm sure one of these gurus will be along to help out soon. probably going to need more info as year ,miles .

2017 465 miles

 

[906UP]

There is no code 18 in the service manual, there is a code 8-1, is this what your referring to?

Also, only one post is needed, multiple posts for the same issue just confuses those trying to help you. Delete one or the other please.

 

[906UP]

 

[marty lawson]

Welcome from the once not run by Commy’s Michigan!

Need pics of your rig to start with!
Pics Or It Didnt Happen!

Why do pic what do mean or it didn't happen

 

[marty lawson]

There is no code 18 in the service manual, there is a code 8-1, is this what your referring to?

Also, only one post is needed, multiple posts for the same issue just confuses those trying to help you. Delete one or the other please.

I changed TP sensor and angel sensor i dont know how to delete i am not very good useing smartphone

 

[Remington]

Why do pic what do mean or it didn't happen

When u join, we like to see pics of your machine. So we say post some pics for proof or what your taking anout didn't happen.
kinda rule #4 If you will.

 

[906UP]

I changed TP sensor and angel sensor i dont know how to delete i am not very good useing smartphone

Use the troubleshooting guide I posted and report back with the results. Grab a DVOM (digital volt ohm meter) and test instead of throwing parts at it. If you don't have one, get one or find a friend who has one to help

 

[marty lawson]

I

Use the troubleshooting guide I posted and report back with the results. Grab a DVOM (digital volt ohm meter) and test instead of throwing parts at it. If you don't have one, get one or find a friend who has one to help

I ordered a code reader for 2017 p500

 

[906UP]

I

I ordered a code reader for 2017 p500

A "code reader".....????

Not sure there is such a thing for a Honda but OK.....
The code only points you to the system with the fault. You'll still need to troubleshoot the system. Most likely it's a bad connection or ground, component failures are on the rare side with these bikes

 

[Neohio]

I

I ordered a code reader for 2017 p500

Something like this?

Honda Pioneer, Honda Talon, SCS Service Check Shorting Connector Plug For Honda Pioneer/Talon

4-pin and 6-pin options. Similar to Honda Part Number: 070PZ-ZY30100 SCS SRVCE CONNECT0R Features: The Honda Service Check Short Service connector is a simple jump connector used to check and clear the Diagnostic Trouble Codes (DTC). This SCS service connector is needed on a wide range of...

store.hondasxs.com