P1000m5 Project no more butt gravy

[BWAF]

Beer check

Little machine work

Mount Dtdp Switch down for heat in cab up for NO more gravy

Mount fan and brackets

Trip to Colaw Rv for vent

4 pin trailer plug ext.cut in half so front plastic can come and don't half to unwire

Need to cut 4" hole and put flex pipe on.Repeat step one as many times as needed

 

[Admin]

 

[BigOL3]

Beer checkView attachment 71899Little machine work View attachment 71900Mount Dtdp Switch down for heat in cab up for NO more gravy View attachment 71901Mount fan and brackets View attachment 71902[/ATTACH]Trip to Colaw Rv for vent View attachment 719144 pin trailer plug ext.cut in half so front plastic can come and don't half to unwire View attachment 71905 Need to cut 4" hole and put flex pipe on.Repeat step one as many times as needed View attachment 71903 View attachment 71904 View attachment 71906 View attachment 71909

Good job.

 

[CumminsPusher]

Looks good. That’s a good way to spend the day off.

 

[BWAF]

Good job.

Thanks.Was thinking I have one more fan might plumb it down by front drive shaft up under dash for defrost on window

Sent from my SM-G930U using Tapatalk

 

[BWAF]

Looks good. That’s a good way to spend the day off.

Yes it was .Thank you !

Sent from my SM-G930U using Tapatalk

 

[Hondasxs]

Stand by.. Trying to fix pictures.

 

[Cuoutdoors]

That's basically what I did. I definitely need a second fan.

I think @CumminsPusher had mounted an 8" radiator style fan at an angle under the passenger seat blowing to the back. I think I'm going to do that before summer.

Nice thing about your set up is you can reverse the wires and blow warm air in when it's cold. That's what I do

Sent from my SM-G950U using Tapatalk

 

[BWAF]

That's basically what I did. I definitely need a second fan.

I think @CumminsPusher had mounted an 8" radiator style fan at an angle under the passenger seat blowing to the back. I think I'm going to do that before summer.

Nice thing about your set up is you can reverse the wires and blow warm air in when it's cold. That's what I do

Sent from my SM-G950U using Tapatalk

Polarity reversing switch it's already there

Sent from my SM-G930U using Tapatalk

 

[BWAF]

Stand by.. Trying to fix pictures.

Thank you

Sent from my SM-G930U using Tapatalk

 

[MountainMan]

Beer check
View attachment 71928
Little machine work
View attachment 71929
Mount Dtdp Switch down for heat in cab up for NO more gravy
View attachment 71930
Mount fan and brackets
View attachment 71931
Trip to Colaw Rv for vent
View attachment 71932
4 pin trailer plug ext.cut in half so front plastic can come and don't half to unwire
View attachment 71934
Need to cut 4" hole and put flex pipe on.Repeat step one as many times as needed
View attachment 71933

I like this. It is on my list to do. I am more interested in using it as a heater during cold weather. I am curious, how noisy is the fan? Can you hear it while the engine is running? Also, how well does it work when running the fan in reverse? I am curious how efficient the blades are when running them backwards.

 

[BWAF]

I like this. It is on my list to do. I am more interested in using it as a heater during cold weather. I am curious, how noisy is the fan? Can you hear it while the engine is running? Also, how well does it work when running the fan in reverse? I am curious how efficient the blades are when running them backwards.

Not quite done yet ,with cab comfort kit don't think it will be to bad

Sent from my SM-G930U using Tapatalk

 

[BWAF]

Fan does move more air one way I mounted my for summer if you use heat more just mount it the other way

Sent from my SM-G930U using Tapatalk

 

[Remington]

One things for sure, that there Banquet is good stuff!

 

[BWAF]

One things for sure, that there Banquet is good stuff!

Well under seat is done left flex pipe off for now still get air flow both ways . Sound level not to bad . Now just finish up some wiring may add second battery while here .

Sent from my SM-G930U using Tapatalk

 

[Remington]

Well under seat is done left flex pipe off for now still get air flow both ways . Sound level not to bad . Now just finish up some wiring may add second battery while here .View attachment 72002View attachment 72003

Sent from my SM-G930U using Tapatalk

There’s that Banquet again! It’s like where’s Waldo!

 

[BWAF]

There’s that Banquet again! It’s like where’s Waldo!

Waldo is all gone back to the keystone .

Sent from my SM-G930U using Tapatalk

 

[MountainMan]

Well under seat is done left flex pipe off for now still get air flow both ways . Sound level not to bad . Now just finish up some wiring may add second battery while here .View attachment 72002View attachment 72003

Sent from my SM-G930U using Tapatalk

I sure like the looks of that. Can you rotate the louvers to direct the air flow or close them?

 

[BWAF]

I sure like the looks of that. Can you rotate the louvers to direct the air flow or close them?

Rotate and close but took out the closing part thought it might vibrate shut

Sent from my SM-G930U using Tapatalk

 

[BWAF]

Well under seat is done left flex pipe off for now still get air flow both ways . Sound level not to bad . Now just finish up some wiring may add second battery while here .View attachment 72002View attachment 72003

Sent from my SM-G930U using Tapatalk

Added flex pipe from vent to fan back in the winter moves way more air with it on I think both ways but believe it mad it a little louder

Sent from my SM-G930U using Tapatalk

 

[BWAF]

@Eltobgi you found one of my old threads I've been searching for some of these even with title i still cant find when i search in tapatalk or on website ! It's like after I bought lifetime membership all my old stuff disappeared cause I was on here free for about a year .@Hondasxs

Sent from my SM-G930U using Tapatalk