BOX1

Russ989’s Trifecta Build

box4

Russ989

#YammerHammer999cc
Lifetime Member
Supporting Member
Club Contributor
Dec 18, 2017
15,694
79,920
113
Missouri
Ownership

1000-5
[HASHTAG]#shouldhaveboughtaGeneral[/HASHTAG]

Look forward to seeing what happens to this machine!
Lol, I bet you are. I spent most of the night trying to convert it into a belt machine but no success yet. My next step is to etch Northstar into the engine case. ;)
 
Last edited:

JeremieBaker

President of #NTC
Lifetime Member
Supporting Member
Jan 30, 2018
16,713
79,101
113
Canton, OH
Ownership

500
Lol, I bet you are. I spent most of the night trying to convert it you a belt machine but no success yet. My next step is to etch Northstar into the engine case. ;)
If you want it to be more Polaris-like there are two obvious routes to go...
1) Lighter/Matches (I'd recommend towing it out of the garage first though.)
2) Every time you take it out of the garage for a ride you can send me a random deposit of money so you can feel like you paid for a repair

I think either will help you feel more like a Polaris owner.
 

Russ989

#YammerHammer999cc
Lifetime Member
Supporting Member
Club Contributor
Dec 18, 2017
15,694
79,920
113
Missouri
Ownership

1000-5
If you want it to be more Polaris-like there are two obvious routes to go...
1) Lighter/Matches (I'd recommend towing it out of the garage first though.)
2) Every time you take it out of the garage for a ride you can send me a random deposit of money so you can feel like you paid for a repair

I think either will help you feel more like a Polaris owner.
I like your thinking JB. I might have to incorporate those ideas! :D
 

CumminsPusher

The woods made me do it,yet again!
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
22,983
99,051
113
Washington/Idaho
Ownership

1000-5,
Other Brand
I like your thinking JB. I might have to incorporate those ideas! :D
You should zip tie a couple extra belts onto to roll cage so you can be one of the cool guys:cool:
I’m happy for ya can’t wait to see the progress and adventures!
 

Russ989

#YammerHammer999cc
Lifetime Member
Supporting Member
Club Contributor
Dec 18, 2017
15,694
79,920
113
Missouri
Ownership

1000-5
Can't wait to see what you do since this is your 3rd Pioneer build I'm sure it will be well thought out and purpose built. Go ahead and get started so I can check it out.
I appreciate your confidence in my ability to plan but you are giving me way too much credit lol.
 
box4

Russ989

#YammerHammer999cc
Lifetime Member
Supporting Member
Club Contributor
Dec 18, 2017
15,694
79,920
113
Missouri
Ownership

1000-5
No I think you have a very good idea what you need to build it for your type of riding and it will be 100% trail ready by Takeover.
That’s the plan. Now for finding a way to achieve it. It’s crazy how much more expensive accessories and parts are for the 1000. Oh well, that’s my own fault lol.
 

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
1,947
5,800
113
Oshkosh, Wi
Ownership

1000-5
That machine is so clean.

You don't have to listen to anything I say, but if you take this one suggestion seriously , I'm confident you'll be happy in the long run.

Start with this post
Rock slider prep
P1000 - Todd's 2018 Build
Follow with this post
Rock slider install
P1000 - Todd's 2018 Build

Note the red rock sliders in this photo, even partially to my surprise they are still straight at 900 miles.

IMG_20191201_160023.jpg



If you're looking for a beefy under carriage upgrade this post is a good use of 2 more tube gussets

P1000 - Todd's 2018 Build
 

Russ989

#YammerHammer999cc
Lifetime Member
Supporting Member
Club Contributor
Dec 18, 2017
15,694
79,920
113
Missouri
Ownership

1000-5
That machine is so clean.

You don't have to listen to anything I say, but if you take this one suggestion seriously , I'm confident you'll be happy in the long run.

Start with this post
Rock slider prep
P1000 - Todd's 2018 Build
Follow with this post
Rock slider install
P1000 - Todd's 2018 Build

Note the red rock sliders in this photo, even partially to my surprise they are still straight at 900 miles.

View attachment 168553


If you're looking for a beefy under carriage upgrade this post is a good use of 2 more tube gussets

P1000 - Todd's 2018 Build
You’ve got my attention, I was trying to figure out how I was going to protect those. I’m checking them out right now!
 

Russ989

#YammerHammer999cc
Lifetime Member
Supporting Member
Club Contributor
Dec 18, 2017
15,694
79,920
113
Missouri
Ownership

1000-5
That machine is so clean.

You don't have to listen to anything I say, but if you take this one suggestion seriously , I'm confident you'll be happy in the long run.

Start with this post
Rock slider prep
P1000 - Todd's 2018 Build
Follow with this post
Rock slider install
P1000 - Todd's 2018 Build

Note the red rock sliders in this photo, even partially to my surprise they are still straight at 900 miles.

View attachment 168553


If you're looking for a beefy under carriage upgrade this post is a good use of 2 more tube gussets

P1000 - Todd's 2018 Build
Mine only has 70 miles on it, picked it up at the beginning of November.
 

ToddACimer

Pioneer 1005-2
Lifetime Member
Oct 7, 2016
1,947
5,800
113
Oshkosh, Wi
Ownership

1000-5
You’ve got my attention, I was trying to figure out how I was going to protect those. I’m checking them out right now!
Looks like you're doing some light reading in my build thread. The first 5 or 6 pages were quite a rush trying to prep a new machine for wheeling in only 3 weeks. At this point I'm out of $50 and $100 mods but that new 3 core radiator looks so nice...
 

Russ989

#YammerHammer999cc
Lifetime Member
Supporting Member
Club Contributor
Dec 18, 2017
15,694
79,920
113
Missouri
Ownership

1000-5
Looks like you're doing some light reading in my build thread. The first 5 or 6 pages were quite a rush trying to prep a new machine for wheeling in only 3 weeks. At this point I'm out of $50 and $100 mods but that new 3 core radiator looks so nice...
It never ends, this is my third Pioneer build. I’m pretty sure collecting stamps would be cheaper lol.
 
BOX2
box3

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!