SuperATV Aftermarket Winshield

D

dannylj

New Member
Aug 12, 2014
26
20
3
Has anyone installed the full windshield from SuperATV on their 500? The price is right if it is good quality. Thanks. Danny
 
Hondasxs

Hondasxs

Club Founder
Staff member
Lifetime Member
Supporting Member
Feb 13, 2013
18,500
67,170
113
Charlotte, NC
HondaSxS.com
Ownership

  1. 1000-5

  2. Talon R
Re: Aftermarket Winshield

Super ATV makes good products. It looks well built. I do like the latch system they chose. Lot cheaper then Honda's version and they claim its hard coated on both sides.
Here's the link for other readers --> http://www.superatv.com/Honda-Pioneer-5 ... C1303.aspx
SuperATV’s new full windshield is the best windshield on the market. We started with the strongest, thickest, most scratch resistant material. The industry leading 1/4” thick AR Makrolon is much stronger than your average UTV windshield. The material is hard coated on both sides to provide scratch resistance for years of use.
 

Attachments

  • WS-H-PIO500-Honda-Pioneer-500-Windshield-main-01[1].jpg
    WS-H-PIO500-Honda-Pioneer-500-Windshield-main-01[1].jpg
    132.6 KB · Views: 1,033
  • WS-H-PIO500-Honda-Pioneer-500-Windshield-3.jpg
    WS-H-PIO500-Honda-Pioneer-500-Windshield-3.jpg
    94.9 KB · Views: 1,749
Stoney

Stoney

Well-Known Member
Jan 28, 2015
111
549
93
Alberton, Montana
I got mine in yesterday. I will be installing it this weekend. I'll try and remember to post an update. If not nag me about it and I'll get it done :D
 
D

dannylj

New Member
Aug 12, 2014
26
20
3
Thanks Stoney, I would love to hear what you think.
 
Stoney

Stoney

Well-Known Member
Jan 28, 2015
111
549
93
Alberton, Montana
Well I installed the super ATV windshield today. It was a very easy install. Took me about 15 minutes all together no hassle. The rubber molding on the bottom of the plexi was the hardest part to install. But with a little wiggling and firm pressure it snaps right in. The brackets that mount the plexi to the frame go in quickly and easily. I really like them because they sit very flush to the overall design and don't look bulky. Moving the windshield up to access the front hood area is easy. Just loosen the velcro of the mounts and slide the windshield up. Then retighten the velcro to hold the windshield in an elevated position. Overall I am pleased with the design and so is my 4 year old helper.we took it on a test drive to the mailbox afterwards and it worked great for keeping the wind and cold off of our faces. The only negative I can foresee is that the windshield is shorter than the overall height of the roll cage. I'm not sure how I will address that with a roof yet. I would recommend this windshield to others simply because price is good and install is super easy.looks like the mobile app will only let me install one photo at a time so here comes the string.
 
Hondasxs

Hondasxs

Club Founder
Staff member
Lifetime Member
Supporting Member
Feb 13, 2013
18,500
67,170
113
Charlotte, NC
HondaSxS.com
Ownership

  1. 1000-5

  2. Talon R
Your right. The [+] on the attach doesn't seem to work when in mobile.
I'll look into it this week.
 
Stoney

Stoney

Well-Known Member
Jan 28, 2015
111
549
93
Alberton, Montana
Looks like I can do it in two posts!
 

Attachments

  • 20150131_102102.jpg
    20150131_102102.jpg
    1.8 MB · Views: 899
  • 20150131_102148.jpg
    20150131_102148.jpg
    1.3 MB · Views: 913
  • 20150131_102738.jpg
    20150131_102738.jpg
    1.4 MB · Views: 899
  • 20150131_103625.jpg
    20150131_103625.jpg
    1.6 MB · Views: 902
  • 20150131_103621.jpg
    20150131_103621.jpg
    1.6 MB · Views: 900
Stoney

Stoney

Well-Known Member
Jan 28, 2015
111
549
93
Alberton, Montana
Last set
 

Attachments

  • 20150131_103641.jpg
    20150131_103641.jpg
    1.4 MB · Views: 879
  • 20150131_103859.jpg
    20150131_103859.jpg
    240.3 KB · Views: 894
  • 20150131_152320.jpg
    20150131_152320.jpg
    249.8 KB · Views: 895
Stoney

Stoney

Well-Known Member
Jan 28, 2015
111
549
93
Alberton, Montana
By the way HondaSxS I was able to bypass the "+" choosing a single file and then adding the file. One at a time. It worked but was pretty slow. A temp fix if nothing else.
 
Hondasxs

Hondasxs

Club Founder
Staff member
Lifetime Member
Supporting Member
Feb 13, 2013
18,500
67,170
113
Charlotte, NC
HondaSxS.com
Ownership

  1. 1000-5

  2. Talon R
I see. It is short. About 3 inches short. I wonder... When adding the roof if the air flow would help with the low pressure area?
Looking at the oem one, it does mesh with the roof.
 
advertisement
Stoney

Stoney

Well-Known Member
Jan 28, 2015
111
549
93
Alberton, Montana
I'm curious about rain and water. If it comes forward of the roof at any point it will dump into the cab unless the roof extends beyond the top lip.
 
D

dannylj

New Member
Aug 12, 2014
26
20
3
Mine came in yesterday. As stated it is a nice windshield for the money. The only problem is the gasket. I can't seem to get mine to stay in place. I might try a piece of foam pipe insulation.
 
Stoney

Stoney

Well-Known Member
Jan 28, 2015
111
549
93
Alberton, Montana
I had to apply some real firm pressure and a little wiggling. I could feel it click past an inner lip and then it held pretty good.
 
ohanacreek

ohanacreek

My EcoBoost has I4WD
Moderator
Lifetime Member
Jul 25, 2013
11,346
32,050
113
Shelby County, Alabama
Ownership

  1. 1000-5
Hondasxs said:
I see. It is short. About 3 inches short. I wonder... When adding the roof if the air flow would help with the low pressure area?
Looking at the oem one, it does mesh with the roof.

I would think it would all depend on how much air was flowing up and over the windshield. Then being directed by the roof into the low pressure area behind the windshield at speed. There's nothing to the sides to direct any air in so its flowing outward and helping to create the low pressure area.
 
marchinkeja

marchinkeja

New Member
Feb 15, 2015
26
4
3
Carpendale,Wv
Is it possible to open the hood to gain access to the storage compartment once the windshield is installed?
 
marchinkeja

marchinkeja

New Member
Feb 15, 2015
26
4
3
Carpendale,Wv
Super ATV windshield in the 500 isn't available in the tipout .So if I purchase the superatv windshield for the 500 can it be accessed easily.
 
S

sharphook

New Member
Feb 25, 2015
8
5
0
an old inner tube trimmed out and Black Duct tape!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! pull it off in the summer tape it back when cold just like nascar any body southern carries atleast one roll !!!!!!!!!!!!!!!!!!!! Silver only if from Alabama DEM boys call it ALABAMA CHROME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!