Windrock1000 submitted a new Garage Item:
Windrock 1000's- She's Foxy Now
Read more about this showcase item here...
Windrock 1000's- She's Foxy Now
Read more about this showcase item here...
Last edited by a moderator:
JTW is always in a bind, HA!That brings up an idea for a good experiment!
Does anyone know the widths of the factory front rims and factory rear rims? I guessing 7" fronts and 10" rears.
JTW when you get a chance air all tires to the same psi. Now measure the height of each tire. Now measure the circumference.
I'm betting the circumference is smaller on the rear tires. If it is not the same on all tires, I believe your drive train will be in a bind when you are in 4 lock. Will be cool to know if it changes!
What part?I’ve got 28x10x14 terrabites on stock deluxe wheels with the HL lift. I haven’t had any rubbing but if I were doing it all again. I would do something like @Kilo427 or @joeymt33
Pretty sure hes talking about arched a arms with lift built in like catvos or cfabWhat part?
Yup.. arched with lift and running 30sPretty sure hes talking about arched a arms with lift built in like catvos or cfab
@JTW - you ever do this?That brings up an idea for a good experiment!
Does anyone know the widths of the factory front rims and factory rear rims? I guessing 7" fronts and 10" rears.
JTW when you get a chance air all tires to the same psi. Now measure the height of each tire. Now measure the circumference.
I'm betting the circumference is smaller on the rear tires. If it is not the same on all tires, I believe your drive train will be in a bind when you are in 4 lock. Will be cool to know if it changes!
Nope.. haven’t thought anything else about it.. I’ll try and do that this week.@JTW - you ever do this?
Nope, But I need to run larger tires on the front, for impact on square edged rocks, that will require forward a arms, that will cost $ 5,300 with tires and rims all the way around. I am just kinda sick of Honda and there P-1 platform!@JTW - you ever do this?
Nope, But I need to run larger tires on the front, for impact on square edged rocks, that will require forward a arms, that will cost $ 5,300 with tires and rims all the way around. I am just kinda sick of Honda and there P-1 platform!
Nope, But I need to run larger tires on the front, for impact on square edged rocks, that will require forward a arms, that will cost $ 5,300 with tires and rims all the way around. I am just kinda sick of Honda and there P-1 platform!
Nope, But I need to run larger tires on the front, for impact on square edged rocks, that will require forward a arms, that will cost $ 5,300 with tires and rims all the way around. I am just kinda sick of Honda and there P-1 platform!
5,300?! That a bit steep, what dang forward A arms and tires and rims cost that much?!
The Honda dealer wants 3,300 for the lift, a arms + tires and I would go with bead lock rims and 30 inch tires and if I could find some I'd buy 10 ply's. I have busted a front 8 ply and have a rear 8 ply leaking. I don't care for pass words, locks or tires these days. I know I can save some money if I do the wrenching my self but these days all I want to do is ride. You can buy the LE front a arms installed for $ 440.00. Just fronts. I'll keep my P 1 just as it is until some body comes out with a S x S with handling and long travel suspension and a real bed.I paid $300 for my control arms, and if I paid retail it would have been 600 on RMATV for the 30” roctanes. I think your math is a little messed up. If you want a canam, just go buy one though. If I had a sport sxs that’s the one I would have too... no reason to skew the math though. Unless it’s your old age messing with your brain, in that case we will All just smile and nod and say “isn’t that nice”.
Sent from my iPhone using Tapatalk
The Honda dealer wants 3,300 for the lift, a arms + tires and I would go with bead lock rims and 30 inch tires and if I could find some I'd buy 10 ply's. I have busted a front 8 ply and have a rear 8 ply leaking. I don't care for pass words, locks or tires these days. I know I can save some money if I do the wrenching my self but these days all I want to do is ride. You can buy the LE front a arms installed for $ 440.00. Just fronts. I'll keep my P 1 just as it is until some body comes out with a S x S with handling and long travel suspension and a real bed.
The Honda dealer wants 3,300 for the lift, a arms + tires and I would go with bead lock rims and 30 inch tires and if I could find some I'd buy 10 ply's. I have busted a front 8 ply and have a rear 8 ply leaking. I don't care for pass words, locks or tires these days. I know I can save some money if I do the wrenching my self but these days all I want to do is ride. You can buy the LE front a arms installed for $ 440.00. Just fronts. I'll keep my P 1 just as it is until some body comes out with a S x S with handling and long travel suspension and a real bed.
A little different not muchSo where did $5300 come from... and the LE a arms are the same as what you’ve got. Oh wait... they’re painted red.
I got a guy. Give me a call.
Sent from my iPhone using Tapatalk
Bring that baby on over I will take your money! I will even stand behind my work!
He’ll even ‘stand’ behind you if you pay him enough!
Easy money... plus I get a cut! Mother f***’n P I M P!!You have way to big of a smile just thinking about that JT!