250 miles and that Honda display sucks

[PaulF]

The process here is for you to "Like" post 13 in this thread and then I WILL CONTACT YOU. It will be a while, there are a lot of orders.

250 miles and that Honda display sucks

I saw the reviews ripping on the display and thought it couldn't be that bad but it really is. Its too small and no color. How can you drive in manual mode when you can't see the rpm's? For what you pay for the machine, this should be a world class display. I really miss my CanAm Commander...

hondasxs.com

All of you sending me PM's please STOP unless I contact you first. I will not be answering them so don't think I am ignoring you.

 

[Admin]

 

[Sharpy]

I thought about it at first but wanted to test the durability.

Now that I have about 6 months and 1500 miles on it without any problems, I may consider selling them. The others available on the market are bulky and don't move with the tilt wheel like mine (that is the main reason I made my own). The wiring harness requires taking apart and a couple ground wires extended and I still need to create a better switch plate and one for a unit without the Rugged Radio but I I'm thinking...

$75 for the relocation pod.
$25 (plus $50 refundable core charge) for an exchange wire harness (if you don't feel comfortable doing your own).
$25 for the 6 place switch plate to cover the old hole.
$50 for a custom switch plate.

Like this post only if interested at those prices and I will use that as a count and see what I can do depending on interest. If not interested, don't hit the like button so that the count is accurate.

I hit the like 👍 and can't wait to get mine from you

 

[PaulF]

The process here is for you to "Like" post 13 in this thread and then I WILL CONTACT YOU. It will be a while, there are a lot of orders.

250 miles and that Honda display sucks

I saw the reviews ripping on the display and thought it couldn't be that bad but it really is. Its too small and no color. How can you drive in manual mode when you can't see the rpm's? For what you pay for the machine, this should be a world class display. I really miss my CanAm Commander...

hondasxs.com

All of you sending me PM's please STOP unless I contact you first. I will not be answering them so don't think I am ignoring you.

Some of you are not reading the entire thread. Again I WILL NOT ANSWER PM's, you need to like post #13 in this thread and wait for me to contact you

AGAIN, STOP trying to contact me, it is only delaying everyone's orders. Most of your questions are answered here...

$75 for the relocation pod.
$25 for a blank or the 6 place switch plate to cover the old hole (includes optional Talon logo)
$50 For the Live Valve face plate (included optional suspension switch relocation)
$100 for a custom switch plate.

You will need to wait your turn. Like post #13 in this thread only if interested at those prices If not interested, don't hit the like button. These kits are custom made one at a time so when it is your turn, I WILL CONTACT YOU!

This is the only way to get on the list so ABSOLUTELY DO NOT PM ME about these relocation kits, I will not answer any inquires about them (unless I contacted you first).

 

[BPINE]

Install complete, best fitting and designed aftermarket part I have ever installed.

Thanks so much Paul

 

[JACKAL]

Other brands wow you with fancy displays and electronics, but won't make it back home.

Ford use to be the same way with the super duty, fancy interior and infotainment stuff but the engine wasn't going to make it.

Preach it, I only need to know when its flashing on reserve fuel 😝

 

[TMD]

Yes, its location sucks.

I built this for mine and mounted to the steering column so it moves up/down when you tilt the wheel. Not a perfect solution but made it much easier to read when on the move...

View attachment 208273

Hello
I’m new to this club and I joined because of a video I had seen on YouTube about the cluster relocation system you had put on your machine. After following the link, it brought me to this picture of your machine and I said to my wife this is exactly what I have been wanting for my 2019 talon x, not only the cluster in front of me but the rugged radio and in cab communication system intergraded in the dash, I have never been a fan of hanging things all over or under the dash. So to my point, I need this or I want it. Can you give me any info or help with getting to that point? I’m new to all of this I really enjoy taking my wife and kids out ridding when ever I can, and really like my Talon and would like to upgrade a few things . Thanks for any help

 

[Lil_Steve]

Hello
I’m new to this club and I joined because of a video I had seen on YouTube about the cluster relocation system you had put on your machine. After following the link, it brought me to this picture of your machine and I said to my wife this is exactly what I have been wanting for my 2019 talon x, not only the cluster in front of me but the rugged radio and in cab communication system intergraded in the dash, I have never been a fan of hanging things all over or under the dash. So to my point, I need this or I want it. Can you give me any info or help with getting to that point? I’m new to all of this I really enjoy taking my wife and kids out ridding when ever I can, and really like my Talon and would like to upgrade a few things . Thanks for any help

Welcome! All the info you need to get on the list to purchase this kit is in post #13 of this thread. Click below.

250 miles and that Honda display sucks

I saw the reviews ripping on the display and thought it couldn't be that bad but it really is. Its too small and no color. How can you drive in manual mode when you can't see the rpm's? For what you pay for the machine, this should be a world class display. I really miss my CanAm Commander...

hondasxs.com

 

[cekkk]

Prayers to you and your family. Unfortunately I can empathize.

 

[Timw60]

I am interested in the Gauge cluster relocation pod.
What is the price without the 6 switch plate, just the filler plate?
Thanks Tim..

 

[CID]

I am interested in the Gauge cluster relocation pod.
What is the price without the 6 switch plate, just the filler plate?
Thanks Tim..

See post #13 in this thread.

 

[Motor1]

Thoughts and prayers!

PaulF

Apologies to all waiting for these relocation kits. Last 3 weeks have been very hard on the household. Major medical issue (not COVID but much worse) is affecting everything in our lives. I now have enough cluster mounts printed and the initial face plate design done to begin filling orders. I will begin with the first to "like" the post and fill as many as I can, please maintain the same level of patience

6 switch and blank face plates (both with and without the Talon logo) are ready. Plug blanks are available if you need some at $2 each.

Prices are still the same except the Live Valve face plates will be $50, they are double layer and much more complex. I still need to work out a few machining glitches on the LV face plate so these may not ship as fast as the others.

The kit will come with all the necessary hardware, wires, heat shrink and wire loom. You will need some various hand tools, a solder iron, solder and some electrical tape to complete the install.

Shipping/handling and a little for the hardware parts will be a flat $20 for priority mail (Canada will be more).

Unfortunately, I will NOT be offering the exchange wire harness at this time due to issue mentioned above.

Attached is the complete instruction PDF including the harness modification. Please review and make sure you are comfortable with the wiring and drilling holes in your dash before I confirm your order.

PaulF,
I would really like to purchase one of your relocations kits with the blank that has Talon on it. feel free to contact me at 321-258-2134 thanks.

 

[CID]

PaulF

PaulF,
I would really like to purchase one of your relocations kits with the blank that has Talon on it. feel free to contact me at 321-258-2134 thanks.

Sign up in post #13 of this thread.

 

[Gunner1]

Paul, I really like your relocation kit, I purchased another brand and do not like the fact that I have to drill the dash. I am interested on pricing and availability. Also I 3d print (very new at it though)

 

[BPINE]

From Post 13.

I thought about it at first but wanted to test the durability.

Now that I have about 6 months and 1500 miles on it without any problems, I may consider selling them. The others available on the market are bulky and don't move with the tilt wheel like mine (that is the main reason I made my own). The wiring harness requires taking apart and a couple ground wires extended and I still need to create a better switch plate and one for a unit without the Rugged Radio but I I'm thinking...

$75 for the relocation pod.
$25 for a blank or the 6 place switch plate to cover the old hole (includes optional Talon logo)
$50 For the Live Valve face plate (included optional suspension switch relocation)
$100 for a custom switch plate.

You will need to wait your turn. Like this post only if interested at those prices If not interested, don't hit the like button. These kits are custom made one at a time so when it is your turn, I WILL CONTACT YOU!

This is the only way to get on the list so ABSOLUTELY DO NOT PM ME about these relocation kits, I will not answer any inquires about them (unless I contacted you first).

 

[Montecresto]

PaulF

PaulF,
I would really like to purchase one of your relocations kits with the blank that has Talon on it. feel free to contact me at 321-258-2134 thanks.

Post 13

 

[Motor1]

Post 13

already taken care of thx

 

[PaulF]

The response was so so overwhelming that I now have 3 printers and have figured out a better print configuration to more than triple my production output (see pic below). At this current pace, I am about 30 to 45 days out before I am able to fill the most recent "likes". Those of you that "liked" earlier will be getting a PM from me soon (if not already). LV models will be delayed. Honda has back ordered the dash plugs that go where the LV display is moved from and I do not know when I will be getting them.

I will only fulfill the first 100 likes at the current price. After that, these relocation kits may be put on this website's store. I do not know what that price will be until I work it out with the site owner. If you liked post #13 and fail to answer my PM in a timely manner or put your purchase off for later, you will need to buy yours through the site's store.

All of a sudden, I am getting a lack of responses to PM's. I think some members are not aware they have PM's so everyone interested needs to make sure to set their PM (Conversations) notifications to "ON" (see below)...

If I PM you and you are not interested or otherwise not ready to purchase, please respond and let me know so I can remove you from or move to the bottom of the list.

Set notifications ON for "conversations"...

Productions ramped up...

 

[JeffDavis]

I want a kit asap! This money is burning a hole in my wallet! Great looking kit.

 

[JeffDavis]

Preach it, I only need to know when its flashing on reserve fuel 😝View attachment 224063

Any serious issues in those 40000 miles? Any major repairs?

 

[Drifter2247]

Glad to see your hard at it with everything going on. Cant wait till my name comes up!!