Lil Goat gets some love

CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,062
322,675
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
Plan B to get Rhino up and running?
That’s my son’s. Nope bolt it back together with the old crap and run it for the weekend, broken plastics, couple zip ties and a smoked belt system. Damn belts. Pull it back apart next week. we’re going😉
 
Last edited:
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,062
322,675
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
Bed showed up today🤗🤗

AE45DDCE AB82 478E AAB7 A18B1C9885E3
 
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,062
322,675
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
He’s a hell of a guy. Busted ass to get program up and going to cut the sheave but some issue with a battery on the CNC machine? Still working to get it resolved today but overnighted everything else I needed, be here tomorrow. Sheave might make it Friday but it’ll be too late. I’ll get it all back together then pull apart later to replace that part but should be ok for a min.
 
Last edited:
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,062
322,675
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
Few updates.
yesterday I had to chase the FedEx driver down. Saw him leave my work without dropping of my package. Needed that bed for the machine bad so when saw him not slow down I jumped in my car and confronted him about 2 miles down road, long story short it was at my work 15 minutes later.

got bed cleaned up, new taillights in after 1/2 hour bending the mount brackets back straight. Front end is back together, waiting on new plastics but did what I could. It’s missing a couple pieces of plastic that were just too torn up to go back on, they are coming as well but she needs to go tomorrow.

height increase is tremendous, I’ll have to chop the cage like the Pioneer now. It won’t fit in the camper van anymore, plus it looks bad IMO.
54ED2648 72B4 47DA 9715 D0813F5590C0
6AD12084 2C34 4069 9B74 3F74CC2B1219
 
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,062
322,675
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
Clutch parts coming. Need to swap out factory clutch spring with the new performance one, tried figuring out how to do that and remembered the automotive spring press for struts, seems like it’ll work good. Man come on parts!!

6907DAC6 AD29 4241 9A24 43374ED770DF
0189942B 4B1D 4CBB 969A F6541B275A26
 
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,062
322,675
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
As promised my box got here from Hunterworks Clutches. Surprised abut coming byFedEx. Getting late but got some work to do.

012BE21C ACC6 4A67 A44A EAFB6033D652
 
advertisement
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,062
322,675
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
Came back to work and got the secondary clutch cleaned up, resealed, regreased, and purple spring on.
306DD8BC CC66 4831 8D3D 90F3C7A6EC5A
 
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,062
322,675
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
Got her together. Done the Polaris belt but just change, changing all the bad parts and regreasing the secondary on this was kind of a pain. On the primary I am running greaseless rather then all greased up like factory as was suggested by Todd at Hunterworks. Says it engages better with more engine braking and with the shims adds a much lower gear. After a quick rip around the back 40 I will agree with him. This thing has NEVER ran like that. Holy crap. Should give lower cruise and higher top speed, don’t know on that yet.
Now with all that said, the Honda is much cheaper and easier to do. But it is better then it was.
clutch cover and surrounding plastics tomorrow at lunchtime and after work.

8432B296 FC1C 491D B929 667D7EC95829
 
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,062
322,675
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
Ok. Update needed. Howed it do this weekend?
Apparently it now needs computer done as it’s just barely into the rev limiter on full throttle. So that and exhaust are planned. Lots of power out of the hole and it cruises at 50 much lower rpm, not whining as bad.
Ground clearance is very nice and everything actually working including doors opening is a welcome site.
Damn nice having one of the three Sxs winches going lol. The Wolverine got through a mud pit I couldn’t however it got stuck where Pioneer wasn’t close to getting stuck bushwhacking so it pulled itself out once and pioneer once. That’s fair. More stuff coming this week.
I already posted pics on NTC but I’ll do them here as well.
Daughter ran the crap out of it.


CE7B7D09 349A 4D87 9C75 176D4BC00DA4
52FA4DF8 E7EB 440B 93C2 A8E493E88C06
 
Last edited:
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,062
322,675
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
Actually had hood luck with the Boss sound bar that we picked up 4 yrs ago but the remote was attached to the roll bar and broke smacking a tree last year. Love the sound of the unit so instead of replacing it just picked up a little Bluetooth controller to plug right in.works good just got to permanently wire it in tomorrow. She has tunes again nice and cheap.

458E61F7 1D1D 4763 8FA3 55137804AB5A
 
WillyBill

WillyBill

Wheeling Addict
Lifetime Member
Jun 23, 2017
478
1,904
93
Clinton, Utah
Ownership

  1. Talon X LV
Actually had hood luck with the Boss sound bar that we picked up 4 yrs ago but the remote was attached to the roll bar and broke smacking a tree last year. Love the sound of the unit so instead of replacing it just picked up a little Bluetooth controller to plug right in.works good just got to permanently wire it in tomorrow. She has tunes again nice and cheap.

View attachment 280080
Boss will sell that controller with controller-side half of the harness for 37$. Don’t ask me how I know, lol.
 
CumminsPusher

CumminsPusher

Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Oct 14, 2015
42,062
322,675
113
Washington/Idaho
Ownership

  1. Other Brand

  2. 1000-5

  3. Talon X LV
Boss will sell that controller with controller-side half of the harness for 37$. Don’t ask me how I know, lol.
That’s not bad. I wanted something for this weekends ride with you so this was quick. Figured screw it, put it under the hood and hopefully it'll be safe.
 
advertisement

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!