P1000m5 The Rebuild And Life Of "clutch".

CumminsPusher submitted a new Garage Item:

The Build And Life Of "clutch".

Build number 4 on a Pioneer starts now. Been a long road but no one can say I don't bleed red.
First pic
View attachment 60055

Read more about this showcase item here...

 

[Admin]

 

[CumminsPusher]

New whips got here today. Ordered Monday from China for 118/set of 3ft dream whips, so not too bad. Ordered remote rather then Bluetooth ant they are single controller for both. We’ve broke them from the expensive ones to the cheapies so decided on the cheapies and 1ft shorter so they don’t catch on anything.
Seem good quality, led is wrapped around an inner tube with an external tube to protect the strip. These are a little thicker then normal because of the twin tube setup but should do the trick, should take some good hits like that. Been since the curse of Mary’s Ridge April before last since we’ve had um.

 

[Admin]

 

[DG Rider]

View attachment 88771 View attachment 88772
Broke a bunch but a lot of people all chipped in with ideas tools and Help. We were out a ways so we all through s*** at it to get her to camp. Was a long night but I’m very appreciative to the group awesome bunch!!

Damn! I missed this being so busy moving. Glad everyone walked away.

Nice use of the ball joint tool cap!

 

[GlockMeister]

New whips got here today. Ordered Monday from China for 118/set of 3ft dream whips, so not too bad. Ordered remote rather then Bluetooth ant they are single controller for both. We’ve broke them from the expensive ones to the cheapies so decided on the cheapies and 1ft shorter so they don’t catch on anything.
Seem good quality, led is wrapped around an inner tube with an external tube to protect the strip. These are a little thicker then normal because of the twin tube setup but should do the trick, should take some good hits like that. Been since the curse of Mary’s Ridge April before last since we’ve had um.
View attachment 91733
View attachment 91736 View attachment 91737

Got a link..curious to how they hold up. 118 is alot cheaper than the millars i been lookin at

 

[CumminsPusher]

These are the ones we got. Bought as an offer. Pair 3ft Whip lights Spiral Dream Color Remote control Quick Mount Free Shipping 735317421124 | eBay
They are thicker then any I’ve seen but I surely don’t see as a bad thing. Definitely don’t like suggesting something without fully using but they do seem good quality, we’ve had 5 sets since the 700 and the set that held up best was the direct from China set we had last.
The seller got them to us in a week and emailed several times throughout so I think probably good service if needed. After breaking so many I wasn’t going to blow a ton of money or time.

 

[GlockMeister]

These are the ones we got. Bought as an offer. Pair 3ft Whip lights Spiral Dream Color Remote control Quick Mount Free Shipping 735317421124 | eBay
They are thicker then any I’ve seen but I surely don’t see as a bad thing. Definitely don’t like suggesting something without fully using but they do seem good quality, we’ve had 5 sets since the 700 and the set that held up best was the direct from China set we had last.
The seller got them to us in a week and emailed several times throughout so I think probably good service if needed. After breaking so many I wasn’t going to blow a ton of money or time.

Ill give ya awhile to see how they hold up

 

[Plumber32]

These are the ones we got. Bought as an offer. Pair 3ft Whip lights Spiral Dream Color Remote control Quick Mount Free Shipping 735317421124 | eBay
They are thicker then any I’ve seen but I surely don’t see as a bad thing. Definitely don’t like suggesting something without fully using but they do seem good quality, we’ve had 5 sets since the 700 and the set that held up best was the direct from China set we had last.
The seller got them to us in a week and emailed several times throughout so I think probably good service if needed. After breaking so many I wasn’t going to blow a ton of money or time.

Kinda gay even for you!

 

[CumminsPusher]

Ill give ya awhile to see how they hold up

If you’re not in a hurry I’ll try to kill em and report back

 

[CumminsPusher]

Kinda gay even for you!

Why don’t you lick my corn hole again! Maybe I showed a pic on wrong mode but yours can be just as gay.
Next time we cruise around it’s gunna be awesome. I’ve felt like an outcast at night rolling without anything, pretty excited to be one of the cool guys again lmao. Clutch has never been near as cool as P.J. was.It was lite the hell up.
Haven’t been so excited since we replaced that f***ing pos. Gay or not Clutch is a beast, can’t wait till it’s done

 

[CumminsPusher]

Out with the old in with the new

Damn she’s tall, can’t wait to get her shrunk back down! The Pioneer not my daughter, but I wish I could shrink her back down too

 

[BWAF]

Out with the old in with the new

View attachment 92210
View attachment 92208
Damn she’s tall, can’t wait to get her shrunk back down! The Pioneer not my daughter, but I wish I could shrink her back down too

Going to paint this one red ?

Sent from my SM-G930U using Tapatalk

 

[CumminsPusher]

Going to paint this one red ?

Sent from my SM-G930U using Tapatalk

No. I was originally going to do my last one white but thought against it. I think it would look funny to have parts of it covered up with the roof and stuff plus when the enclosure is on it wouldn’t look right. If it was all bad ass like Snuffs I’d do it.

Decided to run factory again so enclosure fits plus it’s lighter then building but damn the factory has a lot of slag. Tempted to clean it up but it’d be a long job. Makes me feel good about my welds and cleanup though! Damn it’s rough! Yami does a much nicer job.

 

[Smitty335]

No. I was originally going to do my last one white but thought against it. I think it would look funny to have parts of it covered up with the roof and stuff plus when the enclosure is on it wouldn’t look right. If it was all bad ass like Snuffs I’d do it.
View attachment 92217
Decided to run factory again so enclosure fits plus it’s lighter then building but damn the factory has a lot of slag. Tempted to clean it up but it’d be a long job. Makes me feel good about my welds and cleanup though! Damn it’s rough! Yami does a much nicer job.

I like slobber! hA!

 

[Smitty335]

Out with the old in with the new

View attachment 92210
View attachment 92208
Damn she’s tall, can’t wait to get her shrunk back down! The Pioneer not my daughter, but I wish I could shrink her back down too

Turd! HA! She is going to give me so much poop! I'm not ready, but looking so forward to it and just grin! I will give her a lot of leeway, I want her to win!

 

[Smitty335]

Turd! HA! She is going to give me so much poop! I'm not ready, but looking so forward to it and just grin! I will give her a lot of leeway, I want her to win!

This pertains to my trip out to see CP's family and friends, come Spring. His friends are fair game!

 

[popeye]

Ill give ya awhile to see how they hold up

You know he breaks anvils for fun right?


Sent from my iPhone using Tapatalk

 

[CumminsPusher]

Turd! HA! She is going to give me so much poop! I'm not ready, but looking so forward to it and just grin! I will give her a lot of leeway, I want her to win!

if She’s in the Wolvie you might not have to let her win it’s going to be fun for sure she already knows and will be taking time away from school for the trip.

 

[CumminsPusher]

You know he breaks anvils for fun right?


Sent from my iPhone using Tapatalk

Lol. I don’t try to break stuff!

 

[CumminsPusher]

Sure wish I didn’t have to do a bunch of sidework every time I do something with the Pioneer. Late night tonight.

 

[Smitty335]

if She’s in the Wolvie you might not have to let her win it’s going to be fun for sure she already knows and will be taking time away from school for the trip.

This is a 99% trip according to my wife, 100% for me and she's not coming. I will have to drive my a off to get there and back, just got to ride in that country and meet y'all! You will probably be glad to see me leave! HA!

 

[BWAF]

No. I was originally going to do my last one white but thought against it. I think it would look funny to have parts of it covered up with the roof and stuff plus when the enclosure is on it wouldn’t look right. If it was all bad ass like Snuffs I’d do it.
View attachment 92217
Decided to run factory again so enclosure fits plus it’s lighter then building but damn the factory has a lot of slag. Tempted to clean it up but it’d be a long job. Makes me feel good about my welds and cleanup though! Damn it’s rough! Yami does a much nicer job.

Must of been a new guy

Sent from my SM-G930U using Tapatalk