Vikes79 longship rebuild thread

[Vikes79]

So I’ve been kicking around the idea of a talon x4 for a bit.

Finally pulled the trigger on a rebuilder. Found one that was laid on its side that appears to be workable. Odometer shows less than 900 miles and it’s a 2020. Wanted something a bit newer but it was hard to pass on the price.

Not my first rebuilder ( mostly cars and trucks) but my first rebuilder toy.

Should be a good project for my side business to make parts for etc.

Hopefully I’ll see it in a week or so to see what is really going on with it.

 

[NTCPrezJB]

So I’ve been kicking around the idea of a talon x4 for a bit.

Finally pulled the trigger on a rebuilder. Found one that was laid on its side that appears to be workable. Odometer shows less than 900 miles and it’s a 2020. Wanted something a bit newer but it was hard to pass on the price.

Not my first rebuilder ( mostly cars and trucks) but my first rebuilder toy.

Should be a good project for my side business to make parts for etc.

Hopefully I’ll see it in a week or so to see what is really going on with it.

View attachment 424095 View attachment 424096 View attachment 424097 View attachment 424098 View attachment 424099 View attachment 424100 View attachment 424101 View attachment 424102

Congratulations on the new Talon. Remember RITFC as you put it back together.

 

[Coeus]

So I’ve been kicking around the idea of a talon x4 for a bit.

Finally pulled the trigger on a rebuilder. Found one that was laid on its side that appears to be workable. Odometer shows less than 900 miles and it’s a 2020. Wanted something a bit newer but it was hard to pass on the price.

Not my first rebuilder ( mostly cars and trucks) but my first rebuilder toy.

Should be a good project for my side business to make parts for etc.

Hopefully I’ll see it in a week or so to see what is really going on with it.

View attachment 424095 View attachment 424096 View attachment 424097 View attachment 424098 View attachment 424099 View attachment 424100 View attachment 424101 View attachment 424102

Congrats

 

[Todd627]

Nice rig Vikes ‘Ole Boy!!!

 

[Mopower58]

Congrats on the Talon. Maybe it won’t be too bad.

 

[Bad_bowtie]

Congrats!

 

[Vikes79]

Congrats on the Talon. Maybe it won’t be too bad.

It’s only money and time lol…kinda like women…some take more than others…🤣

 

[Ohio4x4]

It’s only money and time lol…kinda like women…some take more than others…🤣

What's your plan? Back to stock or aftermarket cage?

 

[Backwoods]

Have you figured out what it’s gonna need yet. Hopefully not a great deal of stuff

 

[JenElio]

Have you figured out what it’s gonna need yet. Hopefully not a great deal of stuff

🤦‍♂️........🤷‍♂️ c'mon man!!!! I know they teach reading in Georgia now 🙄👇👇👇😂😂😂

Should be a good project for my side business to make parts for etc.

Hopefully I’ll see it in a week or so to see what is really going on with it.

 

[Backwoods]

🤦‍♂️........🤷‍♂️ c'mon man!!!! I know they teach reading in Georgia now 🙄👇👇👇😂😂😂

I must have skipped that part 🤣🤣🤣🤣

 

[Vikes79]

What's your plan? Back to stock or aftermarket cage?

Not sure yet.

Gotta see how beat up the stock cage is first.

Get the plastics off, get the tape measure and tramgauge out and see how outta square it is first.

I’m sure there are some sections that will need attention there always is.

Likely I’ll just make it a stock machine again. Keep it simple in case I decide to flip it later on.

 

[JenElio]

Not sure yet.

Gotta see how beat up the stock cage is first.

Get the plastics off, get the tape measure and tramgauge out and see how outta square it is first.

I’m sure there are some sections that will need attention there always is.

Likely I’ll just make it a stock machine again. Keep it simple in case I decide to flip it later on.

🤔.....you keeping @Tramguage1 hostage???

What do you mean flip it, that's how it got to you in the first place!!!!🤦‍♂️🙄

 

[-Bear-]

So I’ve been kicking around the idea of a talon x4 for a bit.

Finally pulled the trigger on a rebuilder. Found one that was laid on its side that appears to be workable. Odometer shows less than 900 miles and it’s a 2020. Wanted something a bit newer but it was hard to pass on the price.

Not my first rebuilder ( mostly cars and trucks) but my first rebuilder toy.

Should be a good project for my side business to make parts for etc.

Hopefully I’ll see it in a week or so to see what is really going on with it.

View attachment 424095 View attachment 424096 View attachment 424097 View attachment 424098 View attachment 424099 View attachment 424100 View attachment 424101 View attachment 424102

Nice score, that is perfect for fabrication specials!

 

[Vikes79]

Have you figured out what it’s gonna need yet. Hopefully not a great deal of stuff

It sounds okay running and moving…but won’t know for sure until it’s delivered in a few weeks.

I’ll strip it down and make some assessments when it gets here.

Unfortunately it’s a bit further away than I want to drive in one day with the truck and trailer so I’m having it delivered instead

 

[Vikes79]

Nice score, that is perfect for fabrication specials!

Yes especially for the flat not roundy stuff 🤣

 

[Vikes79]

🤔.....you keeping @Tramguage1 hostage???

What do you mean flip it, that's how it got to you in the first place!!!!🤦‍♂️🙄

I’ll flip it on its other side…that will even out the damage for sure….

 

[JenElio]

I’ll flip it on its other side…that will even out the damage for sure….

I know what a team gauge is, used a few fixing damaged rides.........let us know how the flips work out and VOIDH!!!!!! 😂😂

 

[gparks]

Congrats!

 

[Vikes79]

I know what a team gauge is, used a few fixing damaged rides.........let us know how the flips work out and VOIDH!!!!!! 😂😂

Team gauge?

Your slawables are getting mixed up…