P1000 DIY Skid Plate Template

[Scuba0331]

Would appreciate a copy as well, Thank you.

[email protected]

 

[Admin]

 

[Jayme327]

Does anyone else have a copy that they can forward along?

 

[tjoreo]

Does anyone else have a copy that they can forward along?

@Bones was gracious enough to send them a couple of weeks ago. He had the original version and his different design so I could choose the option that I like the best. I'm sure he will get you taken care off. There are some really great guys on this forum and we owe them all.

 

[Bones]

@Bones was gracious enough to send them a couple of weeks ago. He had the original version and his different design so I could choose the option that I like the best. I'm sure he will get you taken care off. There are some really great guys on this forum and we owe them all.

And I was paid well with a set of kickass door bushings for my trouble Doors are tight as a drum.

 

[tjoreo]

And I was paid well with a set of kickass door bushings for my trouble Doors are tight as a drum.

You definitely deserved them. I'm sure it took you longer to draw up the skid plate then it did for me to make the bushings. Have a good day.

 

[JDPioneer]

Could you send me a copy as well. Thank you in advance!

[email protected]

 

[Sauksxs]

Could you send me a copy as well. Thank you in advance!

[email protected]

 

[Bones]

Could you send me a copy as well. Thank you in advance!

[email protected]

On the way. good luck with it. Mine works well for the way I ride.

 

[Rudykatoodie]

On the way. good luck with it. Mine works well for the way I ride.

If you can send me a set as well I’d really appreciate it! [email protected].

 

[bb22]

I would appreciate a copy as well. Thanks!
[email protected]

 

[ProudDadOf5]

I would really like to have a copy in any CAD format (DWG, DXF, DWT etc..). PDF will work also as long as its "to scale" when I print no scale to my plotter. I use Civil3D 2015 and Map 2014. If you could save back to 2013 or 2015 that would be great.

[email protected]

Thanks in advance

 

[Bones]

I would really like to have a copy in any CAD format (DWG, DXF, DWT etc..). PDF will work also as long as its "to scale" when I print no scale to my plotter. I use Civil3D 2015 and Map 2014. If you could save back to 2013 or 2015 that would be great.

[email protected]

Thanks in advance

Just sent to all three of you guys. Good luck.

 

[ProudDadOf5]

Just sent to all three of you guys. Good luck.

I just received the files. I can’t wait to check them out. Thank you very much sir.

 

[Pmed489]

Can you email me a copy also [email protected]

 

[Bones]

Can you email me a copy also [email protected]

Just sent the files. Let me know how it turns out.

 

[Bones]

Just sent the files. Let me know how it turns out.

I've sent these dxf files to probably 25 people. Anyone actually use them?

 

[JTW]

I've sent these dxf files to probably 25 people. Anyone actually use them?

Lmao

 

[Bones]

Lmao

Funny?

 

[JTW]

Funny?

No, I just have PBA. Or thumb Tourette’s.. not sure as the test results haven’t come it yet.

 

[tjoreo]

I've sent these dxf files to probably 25 people. Anyone actually use them?

It is definitely on my list for the winter. Not many places I worry about around here, but came off a mountain hunting the other day and wish I had your plate underneath me. Just changed my oil today and I think I will definitely go with your 3 piece design. It should make changing the oil easier.

Sent from my SM-T350 using Tapatalk