P1000m5 The Rebuild And Life Of "clutch".

[RB3offroad]

I think I remember hearing something like that. I’m loving this rig so much. I’m kinda hell bent to get it more solid. I’ve always been against throwing bad ass tie rods in it because of a possible failure of the rack. I kinda wanna take out a few less so thinking I want to get steering more stout so it’ll take the stronger tie rods. Right now just want to ride but looking for a winter project.

RB3 Racks are awesome and we also added a grease Zurt, took out the plastic bushings and replaced with a metal bushing.

 

[Admin]

 

[snuffnwhisky]

RB3 Racks are awesome and we also added a grease Zurt, took out the plastic bushings and replaced with a metal bushing.

Very nice unit. It should hold up a lot better than stock. PITA taking it out and in by yourself!

 

[CumminsPusher]

Very nice unit. It should hold up a lot better than stock. PITA taking it out and in by yourself!

I hold s*** you say as solid. Definitely right about those axles. Will be switching racks before long.

 

[CumminsPusher]

That’s town 1000ft down and about 5miles in the distance. 35 to get there though.

Everyone safe over here. Hopefully everyone is having a good night and being careful.
Cheers. Goodnight all.

 

[Neohio]

In my defense, It did say c/o Dave D under it.

 

[CumminsPusher]

In my defense, It did say c/o Dave D under it.

Thank you

 

[Neohio]

Thank you

Your welcome! Hope everything fit as planned.

 

[CumminsPusher]

First flat with the new tires. Got into some pretty heavy pokies though.

 

[popeye]

First bent ball joint I’ve had. View attachment 148414
View attachment 148416
Also bent the hell out of the bumper light bar last night. I don’t run fender flairs, mirrors or pods. Anvils gets broken!!!!!!!!!
View attachment 148418
I will bulletproof! View attachment 148415

Fixed your post for you


Sent from my iPhone using Tapatalk

 

[CumminsPusher]

Fixed your post for you


Sent from my iPhone using Tapatalk

I guess that’s true somedays

 

[elkguide]

Glad to see you back in the woods breaking things... I mean riding again.
Sure is pretty up there where you ride/camp.

 

[CumminsPusher]

Well it’s been over 2 1/2 years since I painted and installed the new front SATV control arms in Puddle Jumper. Now on Clutch for coming on 2 years. Wanted to be different back then and although there are now a few LE with same package I still like the red!
I’ve had the rears for a damn long time but been riding rather then building. Clutch finally gets something of her own again. New parts. Got sick of getting hung up on rocks and stumps.

Will install this weekend up at camp. Excited for getting these on finally
The box lol

 

[elkguide]

Anyone want to take bets on just how long before the paint is scraped off those new parts?




At least it will look good for a few minutes around camp!!!!!!!

 

[CumminsPusher]

Anyone want to take bets on just how long before the paint is scraped off those new parts?




At least it will look good for a few minutes around camp!!!!!!!

Paint gets messed up either way. But I know a guy lol. Used good single stage urethane cleared over and baked at 220 for an hour. Actually the fronts are waisted underneath but have held up not too bad on the visible side. They’ve been on two rigs and about 3000 miles.

 

[elkguide]

Paint gets messed up either way. But I know a guy lol. Used good single stage urethane cleared over and baked at 220 for an hour. Actually the fronts are waisted underneath but have held up not too bad on the visible side. They’ve been on two rigs and about 3000 miles.
View attachment 151367

Well there goes the idea that the paint will be rubbed off in the parking lot!

 

[CumminsPusher]

Well the a arms are in! At least there’s something clean

 

[Eltobgi]

Well the a arms are in! At least there’s something clean
View attachment 151853

Clutch looks good! She’s definitely deserving Now go break her in

 

[snuffnwhisky]

Clutch looks good! She’s definitely deserving Now go break her in

Wear her in, not break, lol

 

[CumminsPusher]

Clutch looks good! She’s definitely deserving Now go break her in

10 minutes out! Had to do oil change and drop a new Rhino in the spot where the AllBalls failed. 4wd engaged.

 

[CumminsPusher]

Wear her in, not break, lol

Either way lol. Hoping no breaks but you know as well as anyone s*** happens. Glad to see something new on her. It’s been too long