Vikes79 longship rebuild thread

Vikes79

Vikes79

SKOL!
Lifetime Member
Jul 18, 2018
10,971
106,484
113
South Dakota
Ownership

  1. 1000-5

  2. Talon X4 LV
Been reading about some of the unjoints spitting the caps…it’s not clear to me if it’s a ‘19 thing or later? Should I burn a couple tacks on the cups? ( really surprised there’s not clips!)

Image
 
906UP

906UP

Well-Known Member
Lifetime Member
Supporting Member
Club Contributor
Jul 6, 2017
13,113
122,415
113
da Yoop
Ownership

  1. 1000-3

  2. Talon X
Been reading about some of the unjoints spitting the caps…it’s not clear to me if it’s a ‘19 thing or later? Should I burn a couple tacks on the cups? ( really surprised there’s not clips!)

View attachment 427673
Yah, it's a good idea to tack the caps. @SuperATV is supposed to be working on a CV shaft for the 4 seaters. I put one in my X2.....AMAZING DIFFERENCE
 
Stilly1155

Stilly1155

Well-Known Member
Supporting Member
Dec 1, 2020
74
326
53
Peoria AZ
Ownership

  1. Talon X4
I did my 21 x4 when it had 1,500 miles on it. Upon inspection then all caps were still tight. Don't forget to disconnect your battery terminals and I also disconnected the connection to the CPU.
Been reading about some of the unjoints spitting the caps…it’s not clear to me if it’s a ‘19 thing or later? Should I burn a couple tacks on the cups? ( really surprised there’s not clips!)
 
CID

CID

Well-Known Member
Lifetime Member
Supporting Member
Oct 27, 2019
5,048
22,627
113
SE Denver-ish
Ownership

  1. Talon R
Been reading about some of the unjoints spitting the caps…it’s not clear to me if it’s a ‘19 thing or later? Should I burn a couple tacks on the cups? ( really surprised there’s not clips!)

View attachment 427673
Remember to move your ground when tacking the caps so you don't run welding current through the U-joint bearings. :oops:
 
Vikes79

Vikes79

SKOL!
Lifetime Member
Jul 18, 2018
10,971
106,484
113
South Dakota
Ownership

  1. 1000-5

  2. Talon X4 LV
got some goodies from club store and a cheap mirror set off of Amazon today! Now I can finish the electrical on the winch etc.

NTC and HFA stickers i already had in reserve

Image
 
SuperATV

SuperATV

Well-Known Member
Vendor
Dec 5, 2013
1,249
8,716
113
Madison, IN
www.superatv.com
Yah, it's a good idea to tack the caps. @SuperATV is supposed to be working on a CV shaft for the 4 seaters. I put one in my X2.....AMAZING DIFFERENCE
Finally got some info on this. They keep bumping it back for some reason. I just bumped it back up the list. No good date for now, but I brought it back to the top of the list.
 
Vikes79

Vikes79

SKOL!
Lifetime Member
Jul 18, 2018
10,971
106,484
113
South Dakota
Ownership

  1. 1000-5

  2. Talon X4 LV
Got some kemimoto lower inserts and what I was hoping was the RR door panel today.

IMG 6417


Hopefully it won’t take another 3 weeks to get the correct panel. 🤦🏼‍♂️

Still waiting for the hood from the mothership.
 
Last edited:
Vikes79

Vikes79

SKOL!
Lifetime Member
Jul 18, 2018
10,971
106,484
113
South Dakota
Ownership

  1. 1000-5

  2. Talon X4 LV
Got some kemimoto lower inserts and what I was hoping was the RR door panel today.

View attachment 428207

Hopefully it won’t take another 3 weeks to get the correct panel. 🤦🏼‍♂️

Still waiting for the hood from the mothership.
Sent back the panel…vendor claims I will receive the panel for the passenger side in the next week.

🤷‍♂️
 
advertisement
Vikes79

Vikes79

SKOL!
Lifetime Member
Jul 18, 2018
10,971
106,484
113
South Dakota
Ownership

  1. 1000-5

  2. Talon X4 LV
Thanks @SuperATV for the help on getting the windshield section replaced !!!

Just a small detail….not 1 dam sticker!

I remember asking!

Don’t worry…it’s all good, thanks for the deal on the part!

IMG 6427
 
Buggyman

Buggyman

Well-Known Member
Lifetime Member
Supporting Member
Jan 3, 2020
34,772
296,856
113
ne. ohio
Ownership

  1. 700-2
Thanks @SuperATV for the help on getting the windshield section replaced !!!

Just a small detail….not 1 dam sticker!

I remember asking!

Don’t worry…it’s all good, thanks for the deal on the part!

View attachment 428574
WTH you buy a SECTION and expect a sticker 🤣🤣
 
advertisement

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!