P1000 DIY Skid Plate Template

[Pilotadam]

I would like to thank ctd power and bones for the files. I was able to locate some used uhmw from a local shop that installs it in semi dump trailers and dump trucks for free! I decided to just make it all one piece and made a front pair of front a arm guards too! I mounted the skid and still need to make the rear a arm guards and then get them mounted up. Thanks again guys!

View attachment 186134 View attachment 186135

How did you mount them on the A-Arms? I have been thinking about doing g the same on my SATV arms.

Sent from my SM-G960U using Tapatalk

 

[Admin]

 

[Haldog77]

I would like to thank ctd power and bones for the files. I was able to locate some used uhmw from a local shop that installs it in semi dump trailers and dump trucks for free! I decided to just make it all one piece and made a front pair of front a arm guards too! I mounted the skid and still need to make the rear a arm guards and then get them mounted up. Thanks again guys!

View attachment 186134 View attachment 186135

I was going to ask where did you find the UHMW-PE material? I just priced it at a local plastic supply house and it was $423.08 plus tax for a 1/2" X 48" X 120" sheet. That is some high dollar skid plates.

 

[e_eversgerd]

How did you mount them on the A-Arms? I have been thinking about doing g the same on my SATV arms.

Sent from my SM-G960U using Tapatalk

I didn't get a chance yet but I plan to mount through an existing hole and also 2- 1" pipe clamps around the a arm and through bolt it with cup washers on the underside.

 

[e_eversgerd]

I was going to ask where did you find the UHMW-PE material? I just priced it at a local plastic supply house and it was $423.08 plus tax for a 1/2" X 48" X 120" sheet. That is some high dollar skid plates.

The piece I got was used and free. The shop where I got it installs it in semi trailers to protect it from damage and help material slide out of the trailer. This piece had been removed and new installed again in a trailer.

 

[Formula1]

Could someone share the PDF with me? [email protected] I sure would appreciate it!

 

[Bones]

Could someone share the PDF with me? [email protected] I sure would appreciate it!

Files on the way.

 

[Formula1]

Files on the way.

Thank you!!!

 

[patpete]

If any one has a pdf could they send a copy to [email protected]. Also could I drop pdf of at my waterjet guy and they cut from it?

 

[Bones]

PatPete files on the way.

 

[chory440]

Could someone share the PDF with me? [email protected] I sure would appreciate it!

how hard is to do the skid plate ...... hows the pdf work im new tothe forum

 

[Mastabeta1]

Im still trying to get the template from someone havent been able to get a response back by here or email... Please help someone?

 

[Bones]

Mastabeta1, post your email address. Or pm it to me.

 

[HotShot848]

I would like the template to please? [email protected]

Thank you so much for the help

 

[Mastabeta1]

Mastabeta1, post your email address. Or pm it to me.

[email protected] your awsome!!!!!!! Sorry was out of town for a couple days.

 

[Jonld]

Can you send the template to me also? [email protected] Thanks!

 

[TI722]

if someone could please send the template to [email protected] I'd greatly appreciate it.

 

[Bones]

Let's see some pictures.

 

[tjoreo]

Let's see some pictures.

I'm in the process of making mine now. I bought the material and printed out the template. Just to find the time to get it done. Thanks again for the template. It will save alot of time.

 

[TI722]

I'm going to change the hole diameters and add the holes along the outside. off of the file you sent me I have a quote through Regal Plastic for $292 plus shipping. I'm guessing that will be close to $75 or $80. It will probably add a little extra when I add the other holes and I'm also contemplating just running it along the rock sliders and covering just a bit of the step and not going straight across right there. I'm thinking that has to fill up with mud pretty bad.

 

[TI722]

3D models of what I'm 95% sure I'm going with.