P1000 NBomars tinkering and silly stuff

Cuoutdoors

Cuoutdoors

Executive Member
Lifetime Member
Sep 12, 2016
4,229
15,539
113
Central Iowa
Ownership

  1. 1000-3
I think I did this when I got buried in creek gravel. I doubt any guards would have helped. Can’t think of any other time it would have been close.


Sent from my iPhone using Tapatalk
You left that out when you told the story the first time.

Sent from my SM-G960U using Tapatalk
 
Smitty335

Smitty335

Well-Known Member
Lifetime Member
Supporting Member
Oct 3, 2016
35,445
208,728
113
NWA Arkansas
Ownership

  1. 1000-3

  2. 1000-5
You left that out when you told the story the first time.

Sent from my SM-G960U using Tapatalk
Nick's got this thing about not using 4WD, bet he uses it now! HA!
 
  • Like
Reactions: BWAF
chadbo

chadbo

Mama tried
Lifetime Member
Jun 14, 2015
2,044
5,659
113
Seminary , Ms
Ownership

  1. 1000-5
We need boot guards for these Super ATV a arms! Wish someone with a little shop and talent would make them. @knuckledeep , @Delton
Didn’t do the back, just arms in front. The diameter is greater than stock so the clamps weren’t perfect. I just put the end in a vise and bent to fit

75357704 4AB0 4B82 AAF8 C9EF90036900
 
knuckledeep

knuckledeep

my trailer queen is trashy
Lifetime Member
Dec 16, 2015
1,052
3,470
113
Eustis florida
Ownership

  1. 1000-3
We need boot guards for these Super ATV a arms! Wish someone with a little shop and talent would make them. @knuckledeep , @Delton
I'm starting to have some free time with this new job so I'll look into it and see what I can come up with. any preference on thickness or material type
 
advertisement
Plumber32

Plumber32

Go ride!
Lifetime Member
Club Contributor
Jun 15, 2014
13,396
69,244
113
Wisconsin
Ownership

  1. 1000-5
I'm starting to have some free time with this new job so I'll look into it and see what I can come up with. any preference on thickness or material type
You call it. Make it good lol!
 
  • Like
Reactions: BWAF
nbomar

nbomar

Well-Known Member
Lifetime Member
Oct 11, 2015
4,416
17,854
113
Springdale, AR
Ownership

  1. 1000-5
Finally able to get out and put some miles on the machine today! Much thanks to @Ragnar406 for being a riding buddy. Had probably 40 machines shoe for a night ride. 4 P-1000’s. Couple 500’s too! I need to do some maintenance on my tide bad! Control arm bushings are wasted! Glad to be in the woods though.


Sent from my iPhone using Tapatalk
 
Delton

Delton

Honda Fanboy
Vendor
Lifetime Member
Club Contributor
Jan 6, 2016
9,967
31,488
113
Middle TN
Ownership

  1. 1000-5
Finally able to get out and put some miles on the machine today! Much thanks to @Ragnar406 for being a riding buddy. Had probably 40 machines shoe for a night ride. 4 P-1000’s. Couple 500’s too! I need to do some maintenance on my tide bad! Control arm bushings are wasted! Glad to be in the woods though.


Sent from my iPhone using Tapatalk
I'm right with you on needing to do some maint man. Got an axle popping and front arms need greasing bad. Rear bushings are shot. I got over 5200 miles before it needed anything but brake pads. I got no complaints. Post some pics!!
 
nbomar

nbomar

Well-Known Member
Lifetime Member
Oct 11, 2015
4,416
17,854
113
Springdale, AR
Ownership

  1. 1000-5
I'm right with you on needing to do some maint man. Got an axle popping and front arms need greasing bad. Rear bushings are shot. I got over 5200 miles before it needed anything but brake pads. I got no complaints. Post some pics!!

Of course.... I didn’t take any. I think @Ragnar406 took some and some video so hopefully he will be updating his thread soon. He was still there riding. Wouldn’t surprise me if he stays out there. I bet that groups rides til sunup or close to it.


Sent from my iPhone using Tapatalk
 
Delton

Delton

Honda Fanboy
Vendor
Lifetime Member
Club Contributor
Jan 6, 2016
9,967
31,488
113
Middle TN
Ownership

  1. 1000-5
Of course.... I didn’t take any. I think @Ragnar406 took some and some video so hopefully he will be updating his thread soon. He was still there riding. Wouldn’t surprise me if he stays out there. I bet that groups rides til sunup or close to it.


Sent from my iPhone using Tapatalk
Good luck to them is all I can say. This old man needs some beauty sleep.
 
Ragnar406

Ragnar406

The Great Bald One
Lifetime Member
Supporting Member
Oct 5, 2016
4,450
17,034
113
Bella Vista, AR
Ownership

  1. 1000-5
Finally able to get out and put some miles on the machine today! Much thanks to @Ragnar406 for being a riding buddy. Had probably 40 machines shoe for a night ride. 4 P-1000’s. Couple 500’s too! I need to do some maintenance on my tide bad! Control arm bushings are wasted! Glad to be in the woods though.


Sent from my iPhone using Tapatalk
Lots of fun, we need to get back out there with a smaller group and explore more. I almost stayed think I made it home about 3:30 - I only took a couple of photos and one trail video.. I’ll get that posted. I I might have stayed longer but at the very end I had gone back to see if I could help some people with a flat ... started going back down the hill and my brake petal went darn near to the floor and I could tell something was ... thought about yelling “kilobunga” but when we looked the left rear brake line bolt had come loose - I guess they really mean it when they say locktight is strongly recommended ...
 
Plumber32

Plumber32

Go ride!
Lifetime Member
Club Contributor
Jun 15, 2014
13,396
69,244
113
Wisconsin
Ownership

  1. 1000-5
I changed out 2 bushings in the front yesterday. It was way easier than expected. I had no play in the others so I left them.
 
  • Like
Reactions: BWAF and JTW
nbomar

nbomar

Well-Known Member
Lifetime Member
Oct 11, 2015
4,416
17,854
113
Springdale, AR
Ownership

  1. 1000-5
It is always neat when we show up to a mostly Rzr ride - @nbomar can attest it is like the pioneer is a mystical creature out in the wild - always draws a bunch of people who are inquisitive about.

“This trail is too hard!”

“All the Honda’s made it!” LOL


Sent from my iPhone using Tapatalk
 
advertisement

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!