P1000 The Beast

[Eltobgi]

Did I mention I cut zip ties...

& these are just a small number of what I had from multiple installs of various mods!


Continued removing old wires and sound cables

 

[Admin]

 

[Eltobgi]

With almost all old wires removed time to run front speaker wires...
Start wiring sound cables to amplifiers using Y splitters to run multiple amps front one sound cable...

 

[Eltobgi]

Hooked up Rear speaker wires, Rear amp sound cable, and decided on location using the bar I had the SSV module mounted to, 1 on each side.

What a mess!


Cleaned all connections removing dirt and corrosion and used a little di-electric grease on them.

 

[Eltobgi]

Before getting to far have to adjust settings and Hi Pass Filter... adjusted both Kicker amps


Getting all wires and cable ran and tucked away

And pulled wires through dash switch panel opening to finish positioning amps.

Looking a lot better!

 

[JTW]

Lol.. I wouldn't freak'n do it! I'd buy a f***ing Walkman first!!

 

[Eltobgi]

Now for this mess...

Bet you thought I was done, lol. Nope not even close!

Removed Speaker Box and set off to the side! Has to be re-wired!

Pulled wires down through access panel to aid in running wires back! So at this point you would think all zip ties were removed. Right? Nope, Still a few hidden and pissing me off!

Forgot to add at this point skid plate has been removed, more zip ties removed, and have climbed under the machine, pulled wires, climbed out and pulled and untangled wires about a dozen times! Thinking about quitting

 

[Eltobgi]

Ran speaker wires to the right and power wires to the left and started cleaning up the mess and ensuring no wires will rub on drive shaft.

 

[Eltobgi]

Tough part is over now to run wires up and replace zip ties...

Ran wires up along side the gas tank, &
Using these Kicker speaker wire covers here...

A shot of the wires from underneath! Used the air intake to keep speaker wires and sound cable from sharp metal!

 

[Eltobgi]

A look at fuse panel and relays! Still have to finish a few things under the hood but have to test system first, so for now this is it!

 

[Eltobgi]

To be continued...

Tomorrow I will rewire subs, and make the pvc speaker enclosures to mount into the cup holders!

 

[trigger]

Lol, been there before! It always looks like a cobbled mess of spaghetti when you're routing everything. You can tell by the amount of zip ties that you're doing it right, nice work Eltobgi. Makes you ask yourself 'why am I doing all this stupid sh**', until you power it up and tune it, then you remember why...clean, raw power!

 

[Tigermark]

To be continued...

Tomorrow I will rewire subs, and make the pvc speaker enclosures to mount into the cup holders!

Any progress today?

 

[elkguide]

To be continued...

Tomorrow I will rewire subs, and make the pvc speaker enclosures to mount into the cup holders!

Are you dancing in the street yet?

 

[Tigermark]

To be continued...

Tomorrow I will rewire subs, and make the pvc speaker enclosures to mount into the cup holders!

Hey, wake up! We need to hear this thing! Play some disco. KC and the sunshine band - Get down tonight

 

[Delton]

Hey, wake up! We need to hear this thing! Play some disco. KC and the sunshine band - Get down tonight

I knew there was something about you I would like!! Disco rules!!! Also a fan of da funk. Not that crap soft funk either. I'm talking the nastiest of nasty funk. Play date funky music white boy!!!! Or brown or black or whatever is the case!!!

 

[Delton]

Dude you seriously need to use some of this. It'd make your life alot easier and protect your wiring like secret service.

 

[joeymt33]

Dude you seriously need to use some of this. It'd make your life alot easier and protect your wiring like secret service.
View attachment 44901
View attachment 44902

Secret service! Good one.

I am about to run number four Gauge jumper cables to the rear winch, you think I could get some of the stuff big enough for that?

 

[trigger]

We call that stuff Liqui-tite, probably a brand name. Comes in different sizes. As long as it is sealed at both ends, it is waterproof. If water does get in though, it'll never get out.

 

[Delton]

Secret service! Good one.

I am about to run number four Gauge jumper cables to the rear winch, you think I could get some of the stuff big enough for that?

Heck yeah. I've seen flexible conduit as big as you need at Lowe's. It's really tough stuff plus I like not having wires on rops to snag limbs and stuff.

 

[Windrock1000]

Secret service! Good one.

I am about to run number four Gauge jumper cables to the rear winch, you think I could get some of the stuff big enough for that?

Check advanced auto. They stock #2 wire in the back. Last time it was about the same money as the jumper cables for me.