P1000 Cumminspusher-the New Ride

[CumminsPusher]

Fancy pinky finger beer clogs the tip

Coors or Miller won't!

 

[Admin]

 

[Windrock1000]

Coors or Miller won't!

That thin beer flows smoother!

 

[CumminsPusher]

Emp rear bumper on. Really changes the look of the rear especially with the exhaust. Debated getting the flat black exhaust but glad I didn't now it's a nice splash of color.
Really impressed on how this bumper mounts up it's as solid as can be considering it dumps with the box.

Thanks to everyone who got one and committed and special thanks to @tmjm76691 for the clearance numbers it helped massively. Bumper will be a mud catcher but other then that it fits in my mess of crap and will allow our rear rack.

 

[ohanacreek]

I wanna hear that muffler

 

[CumminsPusher]

Boom boom came in! What a beast I've got to reshape the fiberglass enclosure once again but whatever.

 

[CumminsPusher]

I wanna hear that muffler

Damn I should've done that! Tomorrow 100% lol kids sleeping now grrrrr.


Sent from my iPhone using Tapatalk

 

[CumminsPusher]

Wiring and wiring! Omg it's getting rough. Before the deck powered both upper speaker bars now they are getting amp power under seat. Not cheesing it by going up center posts so back up and around for those. There is a mile of wiring in this thing!



Sent from my iPhone using Tapatalk

 

[CumminsPusher]

Special thanks to @creativeutvgraphics ! Buddy these are sick! "You da' man!" Great job once again!! 6 times now you've come through for us!
By far the largest order yet pics to come don't worry my friend!!
Not the "7" anymore!


Sent from my iPhone using Tapatalk

 

[Remington]

what type of bumper is that and where did u get it?


Sent from my iPhone using Tapatalk

 

[CumminsPusher]

what type of bumper is that and where did u get it?


Sent from my iPhone using Tapatalk

It's an Emp. Ordered on eBay. Very happy for an aftermarket bumper, would've appreciated it to match the front better because I'm about the details but quality and functionality are very good it'll do as it's supposed to do


Sent from my iPhone using Tapatalk

 

[Windrock1000]

Emp rear bumper on. Really changes the look of the rear especially with the exhaust. Debated getting the flat black exhaust but glad I didn't now it's a nice splash of color.
Really impressed on how this bumper mounts up it's as solid as can be considering it dumps with the box. View attachment 37835
Thanks to everyone who got one and committed and special thanks to @tmjm76691 for the clearance numbers it helped massively. Bumper will be a mud catcher but other then that it fits in my mess of crap and will allow our rear rack.
View attachment 37836 View attachment 37837

There you have gone and done it again. If man gets semi- caught up with you- you go ahead and pull something new out of your ***. Love the adds- Really like the pipe can't wait to hear it in person.

 

[popeye]

It's an Emp. Ordered on eBay. Very happy for an aftermarket bumper, would've appreciated it to match the front better because I'm about the details but quality and functionality are very good it'll do as it's supposed to do


Sent from my iPhone using Tapatalk

Hope fully the finish will last longer on your than the front bumper on mine. Pressure washed my rig last night with a turbo tip. And at 2' away some paint blistered off. I thought it was supposed to be powdercoated. But even if its not decent paint should hold up to a pressure washer. So i started looking at the finish a little closer and there were small blisters all over the top side of the bumper. I definitely know they were not there a few weeks ago when i installed my winch. So i picked at the blisters with a pocket knife to find pockets of rust under them. Im not a painter so im not gonna make any claims. But rhis doesnt seem right. Hope i just got a bad one. My rear bumper took the pressure washer like a champ.

Sent from my LGMS631 using Tapatalk

 

[CumminsPusher]

Hope fully the finish will last longer on your than the front bumper on mine. Pressure washed my rig last night with a turbo tip. And at 2' away some paint blistered off. I thought it was supposed to be powdercoated. But even if its not decent paint should hold up to a pressure washer. So i started looking at the finish a little closer and there were small blisters all over the top side of the bumper. I definitely know they were not there a few weeks ago when i installed my winch. So i picked at the blisters with a pocket knife to find pockets of rust under them. Im not a painter so im not gonna make any claims. But rhis doesnt seem right. Hope i just got a bad one. My rear bumper took the pressure washer like a champ.

Sent from my LGMS631 using Tapatalk

Man I'm sorry to here that! Ya that doesn't look good. I've never been into aftermarket bumpers and steel because of that kind of thing but I hated the Honda rear bumper. With the time you've had that there is no way that's powder coated unless the prep was horrible. The finish on my back bumper looked really good and being in this field I did look however it did seem very thin so I'm not thinking powder coat.
Are you going to wire brush and re spray? How's the back have you looked especially in wheel wells?


Sent from my iPhone using Tapatalk

 

[popeye]

Man I'm sorry to here that! Ya that doesn't look good. I've never been into aftermarket bumpers and steel because of that kind of thing but I hated the Honda rear bumper. With the time you've had that there is no way that's powder coated unless the prep was horrible. The finish on my back bumper looked really good and being in this field I did look however it did seem very thin so I'm not thinking powder coat.
Are you going to wire brush and re spray? How's the back have you looked especially in wheel wells?


Sent from my iPhone using Tapatalk

To me it appears that it wasn't sealed or prepared correctly. And it is very thin. I didn't really look at the rear. It was getting dark and I was too pissed off.

Sent from my XT1565 using Tapatalk

 

[CumminsPusher]

To me it appears that it wasn't sealed or prepared correctly. And it is very thin. I didn't really look at the rear. It was getting dark and I was too pissed off.

Sent from my XT1565 using Tapatalk

No I get that and I'm sorry. Keep updating


Sent from my iPhone using Tapatalk

 

[popeye]

Are you going to wire brush and re spray?


Sent from my iPhone using Tapatalk

Not sure what I'm gonna do. Have thought about building it out of aluminum, would also like some hoops around the head lights like yours or that new brand hondasxs hasn't put on yet. Probably just gonna let her rust for a while. Next month or two is gonna be busy

Sent from my XT1565 using Tapatalk

 

[CumminsPusher]

Not sure what I'm gonna do. Have thought about building it out of aluminum, would also like some hoops around the head lights like yours or that new brand hondasxs hasn't put on yet. Probably just gonna let her rust for a while. Next month or two is gonna be busy

Sent from my XT1565 using Tapatalk

If I could do aluminum as well as you or some others here mine would be aluminum!


Sent from my iPhone using Tapatalk

 

[CumminsPusher]

Has anyone seen @AKRider???

 

[popeye]

If I could do aluminum as well as you or some others here mine would be aluminum!


Sent from my iPhone using Tapatalk

Its just time consuming. Takes twice as much time. Its a lot of work for just a few lbs

Sent from my LGMS631 using Tapatalk

 

[CumminsPusher]

Its just time consuming. Takes twice as much time. Its a lot of work for just a few lbs

Sent from my LGMS631 using Tapatalk

Ya but it's bad ass and light. Plus no rusty!


Sent from my iPhone using Tapatalk