CumminsPusher
Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
What better place?Prototype R&D just a few days before takeover??
P1000 Cumminspusher-the New Ride
Third build on a Pioneer platform in a year it can only get better. More lighting,more automation,more protection, more innovation, more storage,more ability,more suspension,more passengers and more fun. Less weight,less vibrations,less roof. Tiring.
J
JTW
Guest
Ahhhhh, I see!No, clutch Reset isn't required for an oil change @JTW ! This is R&D/testing Prototype clutch pack! Top secret stuff
I was even going to the manual and looking.. I was like wtf??!
CumminsPusher
Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
You could do a reset if ya wanted each time gives you something to do if extremely bored
CumminsPusher
Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
New glass is cut. We really liked the grey tint so that'll be back in it.
Again for those looking for a reasonable Honda windshield they are still coming into the dealers broken from horrible packaging a great deal can be found by calling around. Honda gives a huge break.
New glass can be had very reasonable no need of factory glass.
Again for those looking for a reasonable Honda windshield they are still coming into the dealers broken from horrible packaging a great deal can be found by calling around. Honda gives a huge break.
New glass can be had very reasonable no need of factory glass.
E
elkguide
Well-Known Member
Lifetime Member
Supporting Member
Would you please take another picture of that statement and this time make sure that we can clearly see your credit card number.
Promise to not run it up in just one place!
CumminsPusher
Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
That's a prepaid card I get for giving plasma. Not enough on it to matter
Sent from my iPhone using Tapatalk
E
elkguide
Well-Known Member
Lifetime Member
Supporting Member
Man. I didn't realize that that glass was so expensive that it would make you pay for it in blood!!!!!
CumminsPusher
Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
I don't know about you but I literally bleed for my honda!
Sent from my iPhone using Tapatalk
J
JTW
Guest
Out your va-ja-ja??
I mean it's like Christmas with you tonight...
CumminsPusher
Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
I'm giving you plenty to bite on aren't I? You must feel all warm and fuzzy inside much like your last prison sentence.
advertisement
CumminsPusher
Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
I hate admitting I did something wrong publicly and don't break bolts very often but I do post of what not to do and here it is 
Dammit! But after 2.5 hours I won the battle. This guy was almost 2" inside a bolt hole for the trans case and only a 10mm head. Toughest thing in awhile. Yes lots of cussing. Wish @JTW was here to thump on!
Sent from my iPhone using Tapatalk
Dammit! But after 2.5 hours I won the battle. This guy was almost 2" inside a bolt hole for the trans case and only a 10mm head. Toughest thing in awhile. Yes lots of cussing. Wish @JTW was here to thump on!
Sent from my iPhone using Tapatalk
Eltobgi
Well-Known Member
Lifetime Member
Supporting Member
Club Contributor
Congratulations on getting to it! You must feel like you won the lottery! How soon before a testI hate admitting I did something wrong publicly and don't break bolts very often but I do post of what not to do and here it is
Dammit! But after 2.5 hours I won the battle. This guy was almost 2" inside a bolt hole for the trans case and only a 10mm head. Toughest thing in awhile. Yes lots of cussing. Wish @JTW was here to thump on!
Sent from my iPhone using Tapatalk
J
JTW
Guest
I wish I were there to witness that too... lolI hate admitting I did something wrong publicly and don't break bolts very often but I do post of what not to do and here it is
Dammit! But after 2.5 hours I won the battle. This guy was almost 2" inside a bolt hole for the trans case and only a 10mm head. Toughest thing in awhile. Yes lots of cussing. Wish @JTW was here to thump on!
Sent from my iPhone using Tapatalk
CumminsPusher
Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Congratulations on getting to it! You must feel like you won the lottery! How soon before a test
Dude!!!! Got that f***er!!! That's a tight spot to sit that long I was shaking.
It's going to be a second needed something to calm down. All I could think was 2 days f***ing really!!!
Sent from my iPhone using Tapatalk
Eltobgi
Well-Known Member
Lifetime Member
Supporting Member
Club Contributor
I'd slam those in the store and grab another! Lol
Can't believe you let go of the thump comment, you either slacking or scared lol
J
JTW
Guest
It didn't make the stringent criteria I look for..
CumminsPusher
Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Dug in for that screen to check it. Clear again I don't think I'll be doing that again but trying everything right this time not chancing going back together
J
JTW
Guest
I sure hope this works!
CumminsPusher
Just a Honda doing Honda things.
Lifetime Member
Supporting Member
Club Contributor
Thank you and me too. I'm sick of being right where I'm at right now.
advertisement
Similar threads
