p500

  1. monaco

    P500 DIY Half Windshield

    Thanks to a buddy who had access to a sheet break, we cut and built me a half-windshield. I di have the full Honda windshield and it's hard to see through at times, in the sun and dust. This will be my summer windshield for sure - I like the ability to see over it. So satisfying...
  2. My Honda P500

    P500 My Honda P500

    Just purchased used this year with 800 miles, completely stock when I got it.
  3. Steve00

    P500 How often should I change my spark plug on P500

    At what mile marker should I change my spark plugs on my p5?
  4. SouthwestORV

    P500 Impressed - P500 towed trailer all week

    Hello friends, My wife and I just finished moving this evening. We have been hauling loads of our belonging the short distance between our old home (just sold) to our interim rental (new home being built) with the Pioneer 500 all week, and I will say that "Rambo" is a stallion. I worked this...
  5. SouthwestORV

    P500 Pioneer 500 vs old couch :)

    Hey, it was getting tossed in the trash anyways! I decided to have a little fun with it first. Just glad it never snapped and rolled me over.
  6. SouthwestORV

    P500 P500 Door Latch Problem Fixed - Video

    Hello friends, I've been annoyed since day one at the way that my driver's side door rattles, both during operation and while sitting at idle. I got looking closely and figured out the problem - the door latch was mounted poorly from the factory, so it did not latch tight against the rubber...
  7. SouthwestORV

    P500 Pioneer 500 - Top Speed Video - stock tires

    For any interested, here is a video of my 2018 Honda Pioneer 500 with 537 miles, 84.5 hours, doing a full-throttle/top speed run with stock tires at 9psi.
  8. SouthwestORV

    P500 500 Mile Review: 2018 Pioneer 500

    Hello friends, I just passed 500 miles on the odometer and I decided it's time to share my honest thoughts and impressions of the smallest member of the Honda Pioneer family.
  9. SouthwestORV

    P500 Oil Change - HP4S - observations...

    Hello friends. This past Saturday I busted out the manual and changed the oil in our 2018 Pioneer 500. I found that it was not difficult, but it WAS time consuming to do it right. I enjoyed the process, to be honest. I feel like I know the machine better. Anyways, I chose to upgrade to Honda...
  10. PistolPeteSTL

    P500 14x7" wheels all around?

    Good day! I am going to pick up a P500 in the next couple weeks and am researching tires and wheels. My sweetie likes a little bling, so we have decided on 14" wheels. Will there be any issue with running 14x7" front and rear rather than the recommended staggered setup of 14x7 front and 14x8...
  11. SouthwestORV

    P500 Brutal P500 cold start - couldn't quite get it...

    Howdy Pioneer 500 friends. This past week, as you know, we had some severe weather. Between the snow and the below-freezing temperatures on the clear nights following the snow, it was rough. Rambo's suspension and undercarriage were packed full of snow, and in order to avoid it all melting and...
  12. SouthwestORV

    P500 First STREET LEGAL cruise - Pioneer 500

    Hello friends, I finally got Rambo all street legal, so I ran down main street to snag some premium. This was my first (legal) street cruise on Rambo. Keep in mind, it's easy to do street legal in AZ, and it's also socially acceptable and common. The GoPro is hiding behind the bimini top, so...
  13. SouthwestORV

    Pioneer 500 tows 3100+ lbs (video)

    Back by popular demand...this little video we took, just experimenting for fun with our machines. My 2018 Honda Pioneer 500 towed this load easily - it did not require heavy throttle input, therefore not much strain on the clutch. We also made certain the tongue weight was appropriate. We are...
  14. Y

    New from MI

    Hello, I'm Youlikadasauce Hello all, just picked up a p500 last weekend. Previously owned a 350 Rancher. Added a winch and plow along with windshield and top. Just added new wheels and tires today. 27x11x14s sedona ripsaws on Vision 551 wheels. Couldn't help but jump right into upgrades...
  15. M

    New Machine

    Hello, I'm mgm1035 Hello and thanks for the add. I’ve been a member for a few weeks, which helped me finalize my decision to buy a P500. I bought it today and I pick it up in the morning, I got a new 2018 P500. This is a great forum full of very helpful information. I fear I will need to...
  16. SouthwestORV

    P500 -1 Degree Cold Start - VIDEO - finally got a deep freeze in AZ

    Howdy friends, This past week we finally got an deep freeze up here in N/E Arizona, so I went out on the coldest morning and tested the FI capability - flawless, as expected. Yes, you can tell it had to try a little harder, but it woke up.
  17. SouthwestORV

    Snow in Arizona - donuts in the P500 (video)

    We finally got some snow that stuck. So, I figured I'd wake up Rambo - knew he'd want to play in it a little. Keep in mind, I live in N/E Arizona, at 5800 ft elevation.
  18. The Mini Beast

    P500 The Mini Beast

  19. D

    P500 P500 Big Bore Kit

    I know there's been a few threads on this in the past but thought I'd start a new one with fresh info. Hormell's Xtreme ATV has a true 550cc big bore kit available. I was told he has two left and not making more. 11:1 compression likes 93 octane but will work on 91 premium, with K&N & custom...
  20. SouthwestORV

    P500 Pioneer 500 crawling through TIGHT washes (video)

    Hello friends, Yes, I live in AZ, but keep in mind I live at 5800 ft elevation, so we still have a winter here in Northeastern AZ. This past Saturday I took my 12-year-old son out with me exploring the open expanse that surrounds us. Found this cool wash I've never explored before. The 50"...

About us

  • Our community has been around for many years and pride ourselves on offering unbiased, critical discussion among people of all different backgrounds. We are working every day to make sure our community is one of the best.

User Menu

Buy us a beer!

  • Lots of time and money has gone into making sure the community is running the best software, best designs, and all the other bells and whistles. Care to buy us a beer? We'd really appreciate it!

    Beer Fund!

    Club Membership!