P1000 DIY Skid Plate Template

[Leukic]

[email protected] I would love this template

 

[Admin]

 

[Bones]

[email protected] I would love this template

I tried that address and it bounced back.

 

[Leukic]

I tried that address and it bounced back.

Not sure why? Same address I got the notification from the forum of a reply haha.

 

[Claym325]

Question for CTD or those who have done this... Does the sides come exactly to the edge of the side rails? Wondering how much to bring out to protect rails.

Sent from my Pixel 3 XL using Tapatalk

 

[ToddACimer]

Question for CTD or those who have done this... Does the sides come exactly to the edge of the side rails? Wondering how much to bring out to protect rails.

Sent from my Pixel 3 XL using Tapatalk

I would still recommend a tube slider gusset on the rock rails.

 

[Claym325]

I would still recommend a tube slider gusset on the rock rails.

What do you mean exactly? Like bolting a piece of angle on the skid and frame? Trying to avoid kickers/sliders

Sent from my Pixel 3 XL using Tapatalk

 

[ToddACimer]

What do you mean exactly? Like bolting a piece of angle on the skid and frame? Trying to avoid kickers/sliders

Sent from my Pixel 3 XL using Tapatalk

Here is the rock slider post from my build thread. 3/16" formed Ruffstuff tube gusset. VHB bonds it to the tube and it's bolted through the skid plate. Rock solid and no crevise for corrosion

P1000 - Todd's 2018 Build

You can see them here in red above my skid plate

 

[Claym325]

Here is the rock slider post from my build thread. 3/16" formed Ruffstuff tube gusset. VHB bonds it to the tube and it's bolted through the skid plate. Rock solid and no crevise for corrosion

P1000 - Todd's 2018 Build

You can see them here in red above my skid plate

View attachment 145198

Awesome thank you sir. Only thing is I'm not a fan of drilling in my frame. Wondering if I could maybe notch the skid right there and use a squared u bolt, by welding it to the gusset and using a plate over top of the frame?

Sent from my Pixel 3 XL using Tapatalk

 

[ToddACimer]

Awesome thank you sir. Only thing is I'm not a fan of drilling in my frame. Wondering if I could maybe notch the skid right there and use a squared u bolt, by welding it to the gusset and using a plate over top of the frame?

Sent from my Pixel 3 XL using Tapatalk

I wouldn't worry about drilling a few holes. I think I drilled over 100 holes in mine before I rode it. I'd rather add the strength now before bending the sliders and being unable to fix them without lots of welding or full side frame replacement. My sliders can support the weight of either side with both tires off the ground and 4 guys in the machine. Stock they flex when you step on them.


15% off Ruffstuff today using code DanDay at check out.

Universal Tube Reinforcement (Single)

 

[mjn]

Here is the rock slider post from my build thread. 3/16" formed Ruffstuff tube gusset. VHB bonds it to the tube and it's bolted through the skid plate. Rock solid and no crevise for corrosion

P1000 - Todd's 2018 Build

You can see them here in red above my skid plate

View attachment 145198

I see yours bends up behind the front tires.. some others in this thread do not. I like the idea of having it curve up, but will I need forward arms with 28" tires or they rub? I thought someone said that in another thread..

 

[ToddACimer]

I see yours bends up behind the front tires.. some others in this thread do not. I like the idea of having it curve up, but will I need forward arms with 28" tires or they rub? I thought someone said that in another thread..

I have stock arms and 28s. I made my outer panels but they don't rub the tires

 

[mjn]

I have stock arms and 28s. I made my outer panels but they don't rub the tires

and no lift?

 

[ToddACimer]

and no lift?

Fox shocks but no lift

 

[mjn]

Fox shocks but no lift

Perfect. Just what I wanted to hear. Thanks!

 

[Claym325]

Here is the rock slider post from my build thread. 3/16" formed Ruffstuff tube gusset. VHB bonds it to the tube and it's bolted through the skid plate. Rock solid and no crevise for corrosion

P1000 - Todd's 2018 Build

You can see them here in red above my skid plate

View attachment 145198

Todd, as far as the width on your skid, is that the width of the template? Or did you add a little to each side?

Sent from my Pixel 3 XL using Tapatalk

 

[ToddACimer]

Todd, as far as the width on your skid, is that the width of the template? Or did you add a little to each side?

Sent from my Pixel 3 XL using Tapatalk

I've never seen the template. My edges are 16" from the outside of the frame

 

[Shtukscoda]

New user and owner here of a 2020 Pioneer 1000-3. Any chance I could get a copy of that skid plate template? [email protected]
Thank you.

 

[Muttly]

Question for CTD or those who have done this... Does the sides come exactly to the edge of the side rails? Wondering how much to bring out to protect rails.

Sent from my Pixel 3 XL using Tapatalk

Check my pictures in post # 70, I cut the sides 16-5/8 wide for a little protection

 

[haf]

I just purchased a 2019 1000-5 would love a copy of this template if still available.
[email protected]

 

[Jayme327]

I would love a copy please, [email protected]